[JordanForbus]

I’m curious as well. Anyone with 33s have some insight as to how much room they have?

Asking out of curiosity I’ve looked through the form will a 3-5 inch spring lift be enough to clear 35-37s for deep trail mud riding?

 

[JordanForbus]

Asking out of curiosity I’ve looked through the form will a 3-5 inch spring lift be enough to clear 35-37s for deep trail mud riding?

On a stock 2020 maverick x3

 

[Infinity g37G]

Looking for good tires for my X3 XDS. I will prefer made in the US. Right now I have the Tusk Terrabite 30x10x14. After around 1500 miles they start losing air pressure. One is losing air by the rubber 1/8 inch above the beadlock, we had the put a tube in it. When I remove the beadlock I saw Made in China. I am not happy, 5 tires good for the dump.

 

[PeterGriffin]

Asking out of curiosity I’ve looked through the form will a 3-5 inch spring lift be enough to clear 35-37s for deep trail mud riding?

NO. NO lift kits on an X3 for the umpteenth time!

 

[Bigfoot1]

X3 XRS - 2 seat - stock brakes

33x10x15 GBC Terramaster. 10 ply. 41.1 lbs. diameter measures close to 32" at 18 psi
1,200 miles central & east AZ+ Johnson valley with a nail in 1 of them and still going. I think they will go 1,400 miles. B-side out (hard terrain) in sand will push in the corner. Car brakes ok. Good on graded. Great on rocks. Tough tire.

35 x 9.5 x15- System 3 - RT320 - 8 ply- 43 lbs - has anyone tested it?
Contact patch suffers at a 9.5"? Steel belt or what is it?
Weight to tire diameter is attractive. 43 lbs at 35". Should roll over square edge better.
My only fear is the added wear on bearings, brakes, joints, and effect on shock rebound.

Both run about $200 /tire.

Experience anyone?

 

[Ricardo]

Hi guys! i changed from libertys 32" to big km3 32" in my x3 xrc rr. whoever goes through the same path, you will never look back. I love them, it is an incredible tire in all aspects they are simply better. Liberty is not a bad tire but it has nothing to do against km3. MY OPINION

 

[Sandman_73]

Just did my first ride on a new set of 33” System3 R320s. I am pretty impressed with them so far. The extra ground clearance is killer. Im right at 17” now on my DS. You can see how tall they are vs my old 32”(31” measured) MRTs. The R320s are a true to size tire and measure every bit of 33”

 

[Sandman_73]

I have 32x10R14 kantai mongrels mounted on 14x9 and 14x10 hiper sidewinder wheels. Each wheel and tire weigh in at 49 lbs. no rubbing or clearance Issues. 200 miles on this setup and so far so good.
View attachment 258736

You might want to check those weights with another scale. Tire alone is 40-41lbs

 

[SolidMember77]

Just did my first ride on a new set of 33” System3 R320s. I am pretty impressed with them so far. The extra ground clearance is killer. Im right at 17” now on my DS. You can see how tall they are vs my old 32”(31” measured) MRTs. The R320s are a true to size tire and measure every bit of 33”

Where did you get the Hostile wheels from? I love those. Seems everyone is out of stock.

 

[Sandman_73]

Where did you get the Hostile wheels from? I love those. Seems everyone is out of stock.

Ebay. Dont recall the vendor. Just a heads up they are NOT a true beadlock

 

[SolidMember77]

Ebay. Dont recall the vendor. Just a heads up they are NOT a true beadlock

Thanks for the reply. Not necessarily looking for beadlocks. I just really like the looks of those. Yours are a 4/3 offset?

 

[Sandman_73]

Thanks for the reply. Not necessarily looking for beadlocks. I just really like the looks of those. Yours are a 4/3 offset?

Yes 4/3

 

[Rsikes]

64inch xds, 6inch portals, 2 inch puck lift, 38s and 24s clear.

 

[Rsikes]

On a stock 2020 maverick x3

You prolly have your answer by now, but on a 72 inch model yes, on a 64 no.

 

[AZTrail]

Anybody running 32 Regulators on 15x7 401's on an XRS? All this talk of scrub radius has got me questioning 4+3. If I went 5+2 I'd go with the 405's. I still have a few weeks to decide

 

[Rsikes]

19 xmr 72" 42/24s clear 6inch portals with light spring tighten

 

[jknapier]

Anybody running 32 Regulators on 15x7 401's on an XRS? All this talk of scrub radius has got me questioning 4+3. If I went 5+2 I'd go with the 405's. I still have a few weeks to decide

I'm running the Method 401R 15-5 5-0 offset with 33x10x15 tires. Drives amazing

 

[Idkx3]

Got my 32” crawler xg’s on, went with system3 15s. Figured out after the fact that Polaris owns pro armor. Oh well lol.

Adjusted the shocks a little, sitting 16.5 in front 16 in rear

Gusset & shock tower up next, maybe sliders, then better springs.

 

[bsct9a]

Anybody running 32 Regulators on 15x7 401's on an XRS? All this talk of scrub radius has got me questioning 4+3. If I went 5+2 I'd go with the 405's. I still have a few weeks to decide

Im running 32 regulators on system 3 sba4 6+1. It drives amazing for everything I’m doing in AZ. Idk if that helps at all

 

[DooRules]

Got my 35" x 15 x 10 Fuel Gripper T/R/K tires on with Fuel Hardline BL wheels. The tires weigh in at 47 lbs which is pretty awesome for a 35" tire. Just a couple of rides so far but really liking them right now.