Can-Am Maverick Forum banner

Alignment after wheels and tires

3.3K views 17 replies 9 participants last post by  Marc-3  
#1 ·
So I changed my factory X3 X MR wheels and itp cryptid tires to a 5+2 wheel 14" and maxxis carnivores 30x10 and I noticed that the alignment was really off (toe out), is this normal from factory or dealership ?
 
#6 ·
The tires must just be showing the alignment more than your old ones.

I use Long Acre toe plates and thought I was getting the alignment pretty close. Took it to a shop and it is was off much more than I thought.

Toe should be about 3/16 in at the front, zero at the rear if its able to be adjusted.

Tim
 
  • Like
Reactions: WickedWeasel1973
#18 ·
A buddy of mine had the same issue and kept adjusting, even on the trail, but said the steering just never felt right. He finally caved and took it to a shop for an alignment and said the steering is way better than anything he could have done.

I didn’t have any issues going to a 31” Kanati Terra Masters.