X3 and other CanAm XTC Plug and Play Street Legal Kits now available.
PM for Pricing and availability. Link to purchase included below:
Can-Am Maverick X3 Plug & Play Turn Signal System - Uses Factory Tail Lights
This kit is completely plug and play , no wires to cut, no crimping with only power and ground to hook up and plug into OEM harness. Our kit uses the factory brake lights as turn indicators. Most other kits use one 3/4" marker light for each turn indicator. The factory lights are many times larger, making it much safer to be seen. Since these vehicles are used primarily for off road use, we use a lit switch on the dash, instead of those cumbersome turn levers that break off. It includes a lit Hazard Switch and rear power out for the license plate light or whip light.
Note: free shipping on licence plate brackets or switches when purchased with a turn signal kit.
Kit Includes
1 - Turn Signal Controller
1 - Front Harness
1 - Rear Harness
1 - Carling Lit Turn Switch with Vertical Rocker
1 - Horn
1 - Switch Housing
1 - 3/4" Lit Hazard Switch
2 - 3/4" Front LED's
2 - Self tapping screws
15 - Cable Ties
1 - Installation Instructions
TSS-MAVX3
PM for Pricing and availability. Link to purchase included below:
XTC Can-Am Maverick X3 Self-Canceling Turn Signal System with Billet Lever
SKU: ATS-L-CAN-X3 Plug and Play Easy InstallFits Can-Am Maverick X3 and X3 MaxIncludes Billet Turn Signal LeverIncludes two .75″ 3 LED front Amber LightsPlugs into OEM Brake Light Harness, using Factory Rear LightsLaser Etched LED Lit Turn SwitchLit Emergency Hazard SwitchRear Power Out for...
www.proutvparts.com
Can-Am Maverick X3 Plug & Play™ Self Canceling Turn Signal System by XTC
Can-Am Maverick X3 Self Canceling Turn Signal System, Simple Plug & Play System uses Factory Rear Lights for Turn Signals, adds .75" LED Blinker Lights for Front Markers and LED Lit Vertical Contura Turn Signal Switch and a custom Horn / Hazard Lights Rocker Switch in Dash
www.proutvparts.com
Can-Am Maverick X3 Plug & Play Turn Signal System - Uses Factory Tail Lights
This kit is completely plug and play , no wires to cut, no crimping with only power and ground to hook up and plug into OEM harness. Our kit uses the factory brake lights as turn indicators. Most other kits use one 3/4" marker light for each turn indicator. The factory lights are many times larger, making it much safer to be seen. Since these vehicles are used primarily for off road use, we use a lit switch on the dash, instead of those cumbersome turn levers that break off. It includes a lit Hazard Switch and rear power out for the license plate light or whip light.
Note: free shipping on licence plate brackets or switches when purchased with a turn signal kit.
Kit Includes
1 - Turn Signal Controller
1 - Front Harness
1 - Rear Harness
1 - Carling Lit Turn Switch with Vertical Rocker
1 - Horn
1 - Switch Housing
1 - 3/4" Lit Hazard Switch
2 - 3/4" Front LED's
2 - Self tapping screws
15 - Cable Ties
1 - Installation Instructions
TSS-MAVX3