Can-Am Maverick Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
115 Posts
Discussion Starter #1 (Edited)
Hey guys, installing my viper elite winch today. I'm using the factory pre wired connections. I'm not sure which post to connect the black wire with the loop on the end. On the blade connectors I hooked the blue to blue, green to green and black to black. I used the search on here and there were some good pics but I can't tell exactly what post that wire is going to. Thanks for any help.
 

·
Registered
Joined
·
371 Posts
I didn't wire my winch to the factory wires but I imagine being black it is a ground. You could try and hit you switch and see if anything happens how have it right now. If you get nothing ground it and try.
 
1 - 3 of 3 Posts
Top