Can-Am Maverick Forum banner
1 - 20 of 21 Posts

·
Registered
X3 XRS R Triple Black
Joined
·
1,909 Posts
Discussion Starter · #1 ·
What did you do in your X.3 today?

Parker speed skiing

253225
253226
 

·
Registered
Joined
·
533 Posts
Ordered some parts so I have something to do while it's cold out.

ST springs
OEM rack
S3 tower brace
And then some misc. items like wheel bearings, bushings, and brake pads. Outta keep me busy for at least a weekend.
 

·
Registered
X3 XRS R Triple Black
Joined
·
1,909 Posts
Discussion Starter · #3 ·
I guess you all can put a heater in the garage for winter SXS maintenance good luck and share some photos of your build
 

·
Registered
21 X3 XRC
Joined
·
224 Posts
Installed utv inc flat roof. Rugged radios. Half windshield. Heated seats. Kwi clutch kit. Have to order a new primary inner sheeve and shaft though. When i took it apart the shaft the one way bearing rides on has some heavy scoring in it. Explains why my seconday was turning. Tried to sand it down a little to hold off for a bit. Bought the car used with 32 hrson it. Surprised it was like that. Be my first trip out this weekend with it.
 

·
Premium Member
Joined
·
1,799 Posts
Today I install my CT Raceworx A Arms.
Automotive tire Motor vehicle Asphalt Tool Bumper
 

·
Premium Member
Joined
·
1,799 Posts
Did the others fail ?
I did snap lower passenger S3 A Arm, and snap upper Keller ball joint off at the same time on a hard side impact climbing the escalator way to fast in Moab. This was all due to driver error. CT Arms were not available when I started my build or I would have just put them on to start with.
Wheel Tire Crankset Bicycle tire Automotive lighting
Automotive tire Fender Wood Gas Automotive lighting
 
  • Wow
Reactions: AZ Off Road

·
Registered
X3 XRS R Triple Black
Joined
·
1,909 Posts
Discussion Starter · #8 ·
I did snap lower passenger S3 A Arm, and snap upper Keller ball joint off at the same time on a hard side impact climbing the escalator way to fast in Moab. This was all due to driver error. CT Arms were not available when I started my build or I would have just put them on to start with.
View attachment 275930 View attachment 275931
Did ya get Trailmader to haul you out ?
 

·
Premium Member
Joined
·
1,799 Posts
Did the others fail ?
I think I also cracked my Tie Rod mount on same impact in Moab that broke arm, and tie rod as on my next ride in Sand Hollow it snapped off, and I wasn't doing anything difficult at the time. I am lucky it snapped off when I was on flat ground and not climbing a steep cliff or it would have been a nasty situation losing all steering. I also was lucky that @RZR_Joe was out there on the trail to weld it all up for me to get my Can Am off the mountain.
Bicycle fork Bicycle part Wood Rim Gas
Automotive tire Automotive fuel system Vehicle brake Motor vehicle Plumbing
Automotive lighting Wood Gas Metal Personal protective equipment
Tool Gas Auto part Circle Metal
 

·
Premium Member
Joined
·
1,799 Posts
Did ya get Trailmader to haul you out ?
No. I Left my Can Am on the mountain and rode the rest of the day in @craigstumph SXS. What an eye-opening experience that was seeing what someone experienced could climb in a SXS. At the end of the day RZR Joe took the part and welded it then I drove it off the mountain.
 
  • Like
Reactions: jmneill

·
Premium Member
Joined
·
1,799 Posts
.
 

·
Premium Member
Joined
·
1,799 Posts
Did ya get Trailmader to haul you out ?
Not sure what break down you were referring to. Sand Hollow we welded part up and drove it out. In Moab I had a tow service come haul me off the mountain, but I can't remember who the service was. This is the video of the tow company that towed me out of Moab.
Shared using GoPro
 

·
Registered
X3 XRS R Triple Black
Joined
·
1,909 Posts
Discussion Starter · #13 ·
Ha! that sucks breaking down in Moab but that’s Rory he is a good guy and that was TrailMater

Tire Wheel Vehicle Automotive tire Tread

Wheel Tire Sky Cloud Vehicle
 

·
Registered
21 X3 XRC
Joined
·
224 Posts
I did snap lower passenger S3 A Arm, and snap upper Keller ball joint off at the same time on a hard side impact climbing the escalator way to fast in Moab. This was all due to driver error. CT Arms were not available when I started my build or I would have just put them on to start with.
View attachment 275930 View attachment 275931
Will S3 warranty that? 😂
 

·
Premium Member
Joined
·
1,799 Posts
Ha! that sucks breaking down in Moab but that’s Rory he is a good guy and that was TrailMater

View attachment 275936
View attachment 275937
Moab has great towing services for when you break. I was able to drive from Vegas to Moab, break down 3 hours later, get towed out, and back in Vegas all in less than 24hrs. Not my ideal 1-day trip but could've been a lot worse without a tow service available.
 
  • Like
Reactions: AZ Off Road

·
Premium Member
Joined
·
1,799 Posts
Will S3 warranty that? 😂
Yes S3 did full warranty. I did the arm replacement and ran 12 hours at Sand Hollow without any issues. S3 arms are good just not good enough for my talent of breaking things.
Triangle Road surface Orange Wood Asphalt
 
  • Like
Reactions: AZ Off Road

·
Registered
Joined
·
533 Posts
I’m really bad at this picture taking thing…. Front wheel bearings, EBC pads - done. Rear wheel bearings, rear hub bushings, pads, rear axles (on this one to try and prolong replacing the gear), - in progress. and I’ll pull the clutches off and go through them before I call it done.
Motor vehicle Automotive tire Automotive design Automotive lighting Hubcap

Tire Vehicle Wheel Automotive tire Bicycle tire
 

·
Premium Member
Joined
·
1,799 Posts
Today I got my Ct Raceworx Arms installed. Tomorrow I will get all the plastic installed with all the connections plugged in.
Automotive tire Hood Motor vehicle Vehicle Automotive fuel system
 
1 - 20 of 21 Posts
Top