Can-Am Maverick Forum banner

1 - 15 of 15 Posts

·
Registered
Joined
·
292 Posts
Discussion Starter #1
Anyone know what the valves are supposed to be set at. I have all my plastic out after getting my starter recall so I thought I would check my valves.
 

·
Registered
Joined
·
7,381 Posts
Valve clearance

Intake 0.06 mm to 0.14 mm (.0024 in to .0055 in)

Exhaust 0.11 mm to 0.19 mm (.0043 in to .0075 in)
 

·
Registered
Joined
·
413 Posts
That seems like a large spread to me!

Intake 0.06 mm to 0.14 mm (.0024 in to .0055 in)

Exhaust 0.11 mm to 0.19 mm (.0043 in to .0075 in)
 

·
Registered
Joined
·
7,381 Posts
That seems like a large spread to me!

Intake 0.06 mm to 0.14 mm (.0024 in to .0055 in)

Exhaust 0.11 mm to 0.19 mm (.0043 in to .0075 in)
Straight out of the manual….
 

·
Banned
Joined
·
546 Posts
set them on the tight side. THe high end is aloable for wear.. The more lash the less lift =)
 

·
Registered
Joined
·
256 Posts
....

If Im on the side of the trail posting ... its because Im waiting for you to catch up.
 

·
Registered
Joined
·
292 Posts
Discussion Starter #9
Valve clearance

Intake 0.06 mm to 0.14 mm (.0024 in to .0055 in)

Exhaust 0.11 mm to 0.19 mm (.0043 in to .0075 in)
Thanks, I've got a manual for a commander but I figured the specs would be different and the procedure would be the same.
 

·
Registered
Joined
·
7,381 Posts
no problem….I had it open so it didn't take me long to find it….
 

·
Registered
Joined
·
292 Posts
Discussion Starter #11
I just checked these specs with my commander manual and they are the same. Now I can put off buying a maverick manual until I need to know something else.
 

·
Registered
Joined
·
7,381 Posts
I just checked these specs with my commander manual and they are the same. Now I can put off buying a maverick manual until I need to know something else.
I PM'ed you...
 

·
Registered
Joined
·
7,381 Posts
1 - 15 of 15 Posts
Top