Can-Am Maverick Forum banner
1 - 6 of 6 Posts

·
Registered
Joined
·
33 Posts
Discussion Starter · #1 ·
Pulled my upper arm off and noticed where the bolt goes through has wobble wear. I just called UTV Inc and asked them if could install front gusset with the BRP pre runner bumper with winch mount. He told me he was not sure hasn't had time to try it. Thought I would ask people in the forum if they have done this or have heard of anyone doing this. Thanks guys
 

·
Registered
Joined
·
1,255 Posts
The gusset.doesn't work with the regular bumper so I doubt it works with Brp's other bumper. Problem is winch sits back in, right where the gusset bends is the problem. I know, my gusset is scrap now. Winch cost more and will be used. Just hope I don't bend anything.
 

·
Registered
Joined
·
4,535 Posts
for the winch guys maybe utvinc will make a weld on style front gusset
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top