Can-Am Maverick Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
40 Posts
Discussion Starter #1
has any one installed slc 4" lift they sent the wrong instructions and it has a bar that goes in front of the air box, the prob im having is the shock adj now hits the plastic below the light has anyone had this prob.
 

·
Registered
Joined
·
150 Posts
Turn the piggy back to the inside. Had to do the same thing on a S3 3" helped install
 

·
Registered
Joined
·
88 Posts
Hey brother same here on both. Turn the piggy back around. Put the spacer on the other side closer to the firewall. Also call them the bar needs more of a bend and he will send you one.. The bar in front of the air box
 

·
Registered
Joined
·
40 Posts
Discussion Starter #5
I don't think I put the spacer on the other side I will have to take a look at that. What do you mean more bend ?


Sent from my iPad using Tapatalk
 

·
Registered
Joined
·
88 Posts
I have the xmr. my cross bar needs to be bent at a different angle than the other maverickss. if you don't have the xmr never mind about the bar. the spacer needs to go on the other side of the shock to get it away from the metal bracket you put on. but if you don't have the xmr im not sure if any of this helps
 
1 - 6 of 6 Posts
Top