Can-Am Maverick Forum banner

1 - 20 of 53 Posts

·
Vendor
Joined
·
114 Posts
Discussion Starter #1
Hey Maverick Gang,
Some of you followed our previous SIRIUS light threads as well as the testing process. We introduced our new lights last month to go with our VIPER winches, DENALI plows, FIRESTORM heaters, etc.




I. FEEDBACK
We have some early feedback and comparisons from the lights out there. Here is some of what people have said (dealers and riders):




1. “Had a customer stop by for a visit. Noticed he had a light bar on his front bumper. Asked him a bit about it then pulled out the one Sirius 20" I have left. Popped the hood wired the positive and negative to his battery and laid it on top of his light bar. Flipped his on then the Sirius. It was like he didn’t even have his one once we flipped on the Sirius. He paid about $150 more for his "No Name". Literally they were not even proud enough to out a manufacturer name or model # on their product. Needless to say since it is getting dark here at 4:30 he went home with my light bar!!!! Said he was going to give the "No Name" to his brother in law for Christmas. Hahahhaha.”
2. All was in good order, and I must say the SIRIUS LED lights are awesomely bright.
3. "With our short Canadian winter days over driving the factory UTV headlights is a problem. With the SIRIUS 20" LED light bar this is a problem no more."
4. “We love your SIRIUS light bar.”
5. “On a serious note, those lights look great. I have seen light bars a ton more expensive not look anywhere close to that. Good on Motoalliance coming out with a quality light at a working man’s price.”
6. “Here are some more videos I took last night of this bad AZZ Sirius 10” LED light bar. Excellent light!!!! Enjoy. Thanks again Peter. I might just put one on the front of my Ford F350 4X4!!!!”
7. “So I went for a test ride and it shines bright! I wanted something I couldn’t out run and it does that! It shines a long ways and the color is a nice white light….whiter than the Tortrons.”
8. “I just got it today and did a bench test outside. Initial response is “Wow, a nice bright white light that lights up the whole hill behind my house!”
9. "My new 20" SIRIUS LED light bar will drown out my neighbors 30" Rigid. Bragging rights and money to spare...Priceless."





II. COMPARISON


We ordered a Totron light bar to use it as a general comparison since there are a lot of Totron-style bars out there. Certainly not meant to bash any competitors as there are reasons to buy other lights, just trying to provide a genuine comparison. Here are some pictures of the connections as well as comments from our engineer.

Sirius Light Comparison II.JPG SIRIUS Light Comparison I.JPG


Comments from Engineer
Hey, Here are two snips of the wiring harness comparison. The only thing to note on the relay picture is that the Sirius version is much more neatly bound together and has a rugged outer casing around each wiring set. The plug connectors on Sirius lights are water tight while Totrons have open ended wires on one side and a connector on the other side. The dealer we bought it from recommended cutting on the connector and splicing the wires together.


Also to note, the wiring harness is extra ($16) not included in the advertised price we received from the dealer







III. SIRIUS LIGHT PRICING & COMPARISON CHART


Light Bar Comparison Chart.JPG SIRIUS Pricing.JPG




IV. COMMENTS ON QUALITY


Note the quality and warranty matches RIGID....our SIRIUS lights are competitors with Totron and the other low-end lights in price only......not quality. For example, SIRIUS is more than just splash proof (IP67)....it is fully submersible (IP68).


Our stated goal is to introduce a Rigid-quality light at a much better price. Early feedback suggests we are doing that. So how can the price be so much less without sacrificing quality? Three reasons:


1. As a large business, we can purchase large quantities of lights compared to generic businesses just importing stock lights.


2. We avoid distributors like Parts Unlimited. That saves 30%.


3. We are a full powersports' company that can develop long-term relationships with suppliers and produce to our specifications. That can help on price. Again, not just importing stock products. Our engineer is a true electrical specialist, and we have a full range of accessories to go with them.....you won't just get a light bar and have to cobble together accessories somewhere else.






PM me if you need some lights, or just head to our website or give us a call and we can order them up. Forum members always get 5% off (FORUM5) is the discount code, and if you PM me with package thoughts we can do better. Thanks!




Peter Kapsner
President
Motoalliance
Moto Alliance
1-866-527-7637
 

·
Registered
Joined
·
7,381 Posts
Peter - Thanks for taking the time to present this information in a nice easy to read format. It looks like you have a great product in the Sirius LED lights and at a very competitive price point. Any chance you have a side by side comparison of the your lights vs your competitors lights?
 

·
Vendor
Joined
·
114 Posts
Discussion Starter #4
Thanks Heavysledz.....our engineer took a TON of time with these....but you never know until you get them into the market.

The price is for one of them.....do you want pictures mounted or just on their own? Not sure we have them for mounted ones yet, but we'll be working with a local dealer and/or working with our riders that have them.

The best comparison we have is in the specification charts.....I know we are working on getting full videos made comparing Rigid, Sirius, and Totron. I am certainly open to working with people on the boards on these projects. We are working on model-specific pictures for every machine.

Peter
Moto
 

·
Registered
Joined
·
446 Posts
Just pics of them would be fine. Just thinking about using them in replacing my headlights. Needing to see how they will mount up.
 

·
Vendor
Joined
·
114 Posts
Discussion Starter #6
okay.....just forwarded to engineer to see what he has.
 

·
Registered
Joined
·
7,381 Posts
Thanks Heavysledz.....our engineer took a TON of time with these....but you never know until you get them into the market.

The price is for one of them.....do you want pictures mounted or just on their own? Not sure we have them for mounted ones yet, but we'll be working with a local dealer and/or working with our riders that have them.

The best comparison we have is in the specification charts.....I know we are working on getting full videos made comparing Rigid, Sirius, and Totron. I am certainly open to working with people on the boards on these projects. We are working on model-specific pictures for every machine.

Peter
Moto
I was hoping to see a side by side comparison of your lights and your competitors lights so we can see how bright they are and how well the light is distributed....
 

·
Registered
Joined
·
354 Posts
Thinking about 40" LED Light bar that would bolt to the cage with an OEM Sport roof on it.Would like to mount it to vertical bars on the cage.
 

·
Registered
Joined
·
399 Posts
I have the 2" mounted on mine, this little guy is BRIGHT!!!

To compare I also have a 30" SR Cree 5w spot bar (Ebay) and a 20" DR 3w Flood (SAE) mounted on mine.

The Sirius 2" spot is "brighter" and shoots the light further than my big bars. Obviously I get more light output from my bigger bars but in actual brightness and light throw the sirius spot outdoes my 30" Spot bar.

I am very impressed with the Sirius LED bars, I will be buying a second 2" here soon.
 

·
Vendor
Joined
·
114 Posts
Discussion Starter #11
Great stuff. The momentum is really building on these things....so rewarding to get a quality product to you guys when our engineer spent almost a year in development. Thanks!

Peter
Motoalliance
 

·
Vendor
Joined
·
114 Posts
Discussion Starter #12
PM sent about the attachment to the roll cage too. Thanks!
 

·
Registered
Joined
·
446 Posts
Great stuff. The momentum is really building on these things....so rewarding to get a quality product to you guys when our engineer spent almost a year in development. Thanks!

Peter
Motoalliance
Momentum would be going better if we can get some pics of what they look like and some comparison shots with other brands.
 

·
Vendor
Joined
·
114 Posts
Discussion Starter #17
We will have no issues on the lenses for breaking.
 

·
Registered
Joined
·
354 Posts
Which sizes work with the BRP Sport Roof? How would the 40 bar light fit , I'd like to clamp it to the horizontal bar on the front of the cage.Thanks.
 
1 - 20 of 53 Posts
Top