Can-Am Maverick Forum banner

1 - 20 of 47 Posts

·
Registered
Joined
·
2,963 Posts
Her name is Maverick, or Max? Best selfie I've seen yet....mmmmmmm. The SxS is pretty cool too. I recognize the location though. Out in front of the beer garden at the SSSS. I'll be there tomorrow.
 

·
Registered
Joined
·
477 Posts
Dang it man.... She's a looker, much better than the SXS. She wold make a good hood ornament on my boat.....LOL
 

·
Registered
Joined
·
4,535 Posts
Discussion Starter #5
ya there was something about that pic I had to save it , lol
 

·
Registered
Joined
·
4,535 Posts
Discussion Starter #7
I wish there was more came across it on FB selfie's - lol
 

·
Registered
Joined
·
6,621 Posts

·
Registered
Joined
·
6,621 Posts
No doubt about that but that Mav would not be as much maintenance.
 
  • Like
Reactions: Henry427

·
Registered
Joined
·
88 Posts
Sharp!!! I like where they put the Radiator. Sa- wweeetttt!
 

·
Registered
Joined
·
412 Posts
That is one badass ride.
does anybody recognize what brand these wheels are ? im looking for 14' beadlocks

the STIs are 16lbs ea

Hypers are just under 12lb

and OMF spun aluminums are just over 12lb

the hypers and OMFs are almost 4 times the cost of STIs

And i hear the STIs are stronger if going to be beating them up in the woods.

Im just looking for input on guys that have used them i guess before i decide which to buy.

Im not meaning to jack this thread Sorry
 

·
Registered
Joined
·
528 Posts
does anybody recognize what brand these wheels are ? im looking for 14' beadlocks

the STIs are 16lbs ea

Hypers are just under 12lb

and OMF spun aluminums are just over 12lb

the hypers and OMFs are almost 4 times the cost of STIs

And i hear the STIs are stronger if going to be beating them up in the woods.

Im just looking for input on guys that have used them i guess before i decide which to buy.

Im not meaning to jack this thread Sorry
Most probably ITPs since that's their Tire/wheel sponsor
 

·
Registered
Joined
·
9,484 Posts
That is a sweet ride. Looks like a small class 1 car. It should do awesome in the desert races and looks like it would be fun in the dunes.
 

·
Registered
Joined
·
1,059 Posts
does anybody recognize what brand these wheels are ? im looking for 14' beadlocks

the STIs are 16lbs ea

Hypers are just under 12lb

and OMF spun aluminums are just over 12lb

the hypers and OMFs are almost 4 times the cost of STIs

And i hear the STIs are stronger if going to be beating them up in the woods.

Im just looking for input on guys that have used them i guess before i decide which to buy.

Im not meaning to jack this thread Sorry
For the price the STI's are really the only option. I had a set on my 2 seat maverick. They were really good, never lost air and were tough, plus new rings are just over $20. If you scratch one up just get a new one.

I was a sponsored rider for several years by Hiper then DWT. The Hipers are awesome, but are very expensive for the recreational rider. The DWT in my opinion is a nice wheel but is completely over priced. The rings are very weak, and I bent the inner half of one of the wheels nearly every race.

The STI aren't as stylish but function very well. I haven't ever had an STI in race conditions to truly evaluate the strength but my experience with them recreationally was really good.
 

·
Registered
Joined
·
7,381 Posts
man….I keep catching myself coming back to this thread to check out the sweet lookin ride :popped out:
 
  • Like
Reactions: BAMA-S
1 - 20 of 47 Posts
Top