Can-Am Maverick Forum banner

1 - 3 of 3 Posts

·
Premium Member
Joined
·
8,276 Posts
Discussion Starter #1
lets start a thread with solid info on what works and what does not work at all for the STM Rage 6 primary clutch only. please leave you comments off if you do not own one. Keep this thread open for solid info on the Rage6 only. I will share my info as soon as it gets in my hands.
 

·
Registered
Joined
·
3,638 Posts
First off I didn't buy my rage 6 from kris. I bought it from my can am dealer and had them put it in during the 10 hr service.
However kris has gone out of his way to help me step by step in getting the proper setup and getting no monetary compensation whatsoever.
My setup from the factory was 14/2/0 running 26" STU blasters at 4000' it was only reaching 7200 rpm and it chewed a belt in about 2 hours. With Kris's recommendation I'm now running 9/2/2 and now I'm at 7800 rpm. Spot on.
 
1 - 3 of 3 Posts
Top