Can-Am Maverick Forum banner

1 - 7 of 7 Posts

·
Registered
2019 Maverick XRC
Joined
·
73 Posts
Discussion Starter #1
So I got the float mod done, put my clutches back on today and then realized there’s additional hardware and a new procedure for installing the secondary. Now it’s stuck on the shaft. Any ideas how to remove it? I tried a slide hammer with straps, no go

I assume it must be some sort of press fit issue
 

·
Registered
Joined
·
1,480 Posts
your sure you removed the bolt...lol
 

·
Registered
Joined
·
1,480 Posts
you must have twisted/stripped the splines
 

·
Registered
2019 Maverick XRC
Joined
·
73 Posts
Discussion Starter #5
No it slid on easy. I started it and let it idle for a min and then tried to remove it. It has something to do with whatever they do for the kwi float mod
 

·
Registered
Joined
·
461 Posts
Take the belt remover tool put a eye bolt thru the center hole hook your slide hammer to that and now you are pulling in center , getting rid of the strap allows you apply much more pulling force. The strap is a shock absorber
 
1 - 7 of 7 Posts
Top