Can-Am Maverick Forum banner

1 - 4 of 4 Posts

·
Hickory, NC
Joined
·
2,958 Posts
Discussion Starter #1 (Edited)
image.jpg View attachment 2093
Never really paid attention to my seats till today. Notice how much taller the driver is(right) than the passenger. Also check out the different rake, one back seems to be longer than the other, frames are totally different but yet the finished height is the same
And I gotta make a new latch, that one just ain't cuttin it. you slam the thing down 9 times before it hooks. I've bent the
Posts, it still don't work like it should
 

·
Registered
Joined
·
2,067 Posts
Just noticed that on mine last weekend when I pulled them out and sat them on the floor side by side. It's more than just the slider on the drivers side that's for sure.
 

·
Registered
Joined
·
4,536 Posts
the floor post that are coming up need to be bent to , not just seat latch , the bottom foot pegs are tilted to far fwd u need to hammer them back a few good hits with sledge hammer
 

·
Registered
Joined
·
728 Posts
Never really paid attention to my seats till today. Notice how much taller the driver is(right) than the passenger. Also check out the different rake said:
Look at the angle of the lower seat frames.
 
1 - 4 of 4 Posts
Top