Can-Am Maverick Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
96 Posts
Discussion Starter #1
Have stock rims with Sand Tires - Front tires have 5 psi (as stated max on the tire) and rears have 12. Getting sand in the front bead and losing air. Only lost air in the back due to a roll-over.
What ft-lbs are you using for the bolts on the bead lock rims? Is there any special trick to keep sand out, besides slime (LOL ).
 

·
Registered
Joined
·
2,963 Posts
you gotta re-tighten them suckers after every ride just about. They will stop leaking after 3rd or 4th time (mine did) and stay tight. 71 inch pounds I believe. I still check them every couple of rides just to be sure.
 
  • Like
Reactions: bulldogs101

·
Registered
Joined
·
4,535 Posts
run both front and rear tires about 7 psi

check ur bead lock bolts every ride till they stay snug
 
1 - 4 of 4 Posts
Top