[twocents]

Hey has anybody's rear shock bolts loosen up? Was just going over my mav and noticed all 4 bolts loose, top and bottom.

 

[BlueCoyote]

Yes. Bent and broken them too.
The 13s used 10mm bolts, 14s are now 12mm. You can drill the shock spacers out to 12mm or even out to 13mm / .500""

 

[Stevemen18]

Mine were loose from the factory.

 

[MiMav]

No vendor sells 12mm hole spacers with new bolts?

 

[dirtyj]

Thanks for the thread. I am looking for any (RATTLES) on my Maverick and I'll go check even though that is not the one in question or the area.

 

[twocents]

Mine were loose from the factory.

I think that's what it was cause it only had 10 miles on it.

 

[BlueCoyote]

No vendor sells 12mm hole spacers with new bolts?

CT Racing does.

 

[03maxpower]

I would say your dealer installs the shocks. mine are tight for now.

 

[MiMav]

CT Racing does.

Thanks. Going to have to check into that. I didn't have any problems with my shocks and I just recently greased the spherical bearings.

 

[AReed]

Dealers put the shocks on. If the shocks are loose they didn't get them tight enough or they stretched.

 

[MiMav]

Alex, you sell the 12mm hole spacers with bolts? If so how much?