[Goose2]

I would like to know what your engagement RPM is with the different after market primary clutches?
thanks in advance, G2

 

[Chappy227]

Mine is right around 1850/1900 with STM rage 3.

 

[Andy]

Thats the thing with the aftermarket clutches. You can adjust where you want your engagement at, with different primary springs

 

[Canamxteam]

You can with the stocker too


Sent from my iPhone using Tapatalk

 

[Andy]

You can with the stocker too


Sent from my iPhone using Tapatalk

Didn't know there were different spring rates available for the OEM clutch. Thanks for the info.:smile:

 

[Benzo]

epi and Dalton make springs and weights for the stock clutch

 

[heavysledz]

All primaries to include the OEM have the ability to adjust the engagement RPM by changing the springs.....

 

[Goose2]

I have mine set to engage between 2-2100 rpm. I like it a lot although it seems to run more rpm while cruising. Does anybody know if I were to lower engagement down to 17-1800 rpm if that would lower my cruising rpm and by how much?

 

[AReed]

Mine engages a little over 3k rpm. It leaves the line like a raped ape.

 

[Goose2]

Mine engages a little over 3k rpm. It leaves the line like a raped ape.

I like the higher engagement. Just thinking the cruising rpm is a bit high but it could have been me.

 

[AReed]

My cruising rpm is the same when I had a 2000-2200 stall engagement.

 

[Goose2]

So are you saying that if I lower the engagement with a different spring the cruising rpm should be the same as a spring with higher engagement.