Can-Am Maverick Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
150 Posts
Discussion Starter #1 (Edited)
Extreme Metal Products Please design a seat latching system that works...

We all Love everything that you all have designed so-far for the maverick...

Seems that can-am has fallen a bit short on the seat latches...
It has no/very little adjustments except for using a hammer & a dremmel tool to adjust them...

I know you can design a latching system that actually works without having to STAND in the middle of the seat in order to get the thing to latch...
We like to remove them when we get to a resting spot.
While the other riders are sitting on the ground we can-am riders are sitting in the seat on the ground ...
Not to mention that EVERY time we go to the carwash we need to remove them to wash the machine...

There are also issues in the rear seat height adjustment so you will need to address that also...
Maybe remove the rubber cushions and do something different that allows us to set the desired rear height...

I have extreme confidence that you can do it easily... PLEASE !!! We Beg you...
 

·
Registered
Joined
·
4,535 Posts
Yes we need a Sturdy seat base no rubber feet !

As far as u needing to stand and push hard on seat to latch it i use to do the same but I hammered my passenger side seat latch up and it latches real easy now !


Sent from my maverick using Tapatalk 2
 

·
Registered
Joined
·
1,255 Posts
Passenger seat is the worst.
 

·
Registered
Joined
·
4,535 Posts
yes mine to, passenger seat was bad hammered the pin up and its perfect now, fixed in 5 seconds !!!
 
1 - 5 of 5 Posts
Top