Can-Am Maverick Forum banner

No gasket on engine oil drain plug!!!!!!!

8025 Views 10 Replies 6 Participants Last post by  busted knuckle
So I started my 10hr service today and when I took the drain plug off the engine the wasn't a gasket on the plug!!! Has anyone run into this prob before.. no leaks but it really bothers me that they left this off at the dealer.. wow!! Calling them tomorrow to let them know the good news!!!
1 - 11 of 11 Posts
U only need gaskets on Polaris
There is a aluminum washer it probably stuck to the engine. There is a new on in the oil change kit.
Yeah that's what I thought took my knife and scraped on the engine. Nothing..
Can I just use a copper washer from auto zone . Didn't get the kit just the new filter and filling it up with some royal purple
Can I just use a copper washer from auto zone . Didn't get the kit just the new filter and filling it up with some royal purple
yup, any soft material that will crush and form to the case and bolt head.
I'll bet the washer is in your used oil. It probably stuck to the case then fell into your oil dump container When the oil started coming out the drain hole.
I'll bet the washer is in your used oil. It probably stuck to the case then fell into your oil dump container When the oil started coming out the drain hole.
This has happened to me a couple times lately! Pisses me off!
This has happened to me a couple times lately! Pisses me off!
It happened to me.
Well now we know where all of the slippy washers are coming from for the clutch bolt fix..... What weight Royal Purple did you use?
Well now we know where all of the slippy washers are coming from for the clutch bolt fix..... What weight Royal Purple did you use?
0/40
1 - 11 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top