Can-Am Maverick Forum banner

1 - 20 of 61 Posts

·
Registered
Joined
·
874 Posts
Discussion Starter #1 (Edited)
Looking around online I found the market for snow plow setups pretty limited. I called a local dealer here in Minnesota that I as well as many others on here and Aurora wheelers.com/ can-amforum.com have had success with running their Viper winch setup.

Motoalliance hadn't had a chance to design a mount for a plow on a Maverick yet and generously offered a great savings if I brought my machine to them to fabricate a mount. Couple weeks later I left with a winch installed(they offered to install for free) a new plow Mount and a 72" plow.

Peter the CEO of the company kept tabs on the machine and kept me updated throughout the process via email and phone calls. Scott, their lead developer walked me through the mount design and development when I came to pick the Maverick up. Kudo's to Motoalliance for great customer service and helping me with a plow mount.

Here's the pics of the mount and plow setup. I opted for manual turning although they offer a nice hydro-turn setup. Very solid mount. Only drilling that needed to be done was on the front plastic skid for a u bolt. Other than that all bolt on. I took the mount off and inspected everything just to see how it was mounted and they did a great job on fit and finish. Keep an eye on their website, hopefully they get these into production for the masses soon.




 

·
Registered
Joined
·
1,777 Posts
Can you pm me a price to 48359 for the plow with hydraulic turn?

It does include the mount for the Maverick with the plow correct?

Is the hydraulic turn option plug and play?
 

·
Registered
Joined
·
874 Posts
Discussion Starter #8
does anything hang down when you disconnect the plow?

Sent from my SCH-I535 using Tapatalk
If you look in the last picture the only thing that hangs down is the two tabs per side for the winch arms to mount to. If need be the whole mount can be taken off in about 10 minutes. Its all of 10 bolts.
 

·
Registered
Joined
·
338 Posts
If you look in the last picture the only thing that hangs down is the two tabs per side for the winch arms to mount to. If need be the whole mount can be taken off in about 10 minutes. Its all of 10 bolts.
That's what I thought it looked like..thank you.what's the cost plus shipping to 07876?
If you are selling them?

Sent from my SCH-I535 using Tapatalk
 

·
Vendor
Joined
·
114 Posts
We are charging you $500 per mount JT. :) Just kidding.....mounts are going into production today. Typically a 3-4 week turn around time.....we have a lot running right now.

Your vehicle looks AWESOME Tosh.....it was a beauty to look at while it was in our facility. We miss it! Thanks for lending it to us.....great stuff and great photos. And thanks for the props.....Scott and the gals in customer service said you were great to work with.

We'll let you know JT on the mounts. Great to have you on the forums too.

Peter
President
Motoalliance
Moto Alliance
1-866-527-7637
 

·
Vendor
Joined
·
1,767 Posts
Thanks Pete! We have alot of guys pming us already on this kit. Cant wait for you guys to have them done - JT

We are charging you $500 per mount JT. :) Just kidding.....mounts are going into production today. Typically a 3-4 week turn around time.....we have a lot running right now.

Your vehicle looks AWESOME Tosh.....it was a beauty to look at while it was in our facility. We miss it! Thanks for lending it to us.....great stuff and great photos. And thanks for the props.....Scott and the gals in customer service said you were great to work with.

We'll let you know JT on the mounts. Great to have you on the forums too.

Peter
President
Motoalliance
Moto Alliance
1-866-527-7637
 

·
Registered
Joined
·
1,777 Posts
Would also be nice to if you can get a rubber wear blade as an option or where can it be purchased. I had one on my truck plow and it did a better job of removing snow from pavement. Acts sorta like a squeegee.
 

·
Vendor
Joined
·
114 Posts
MSRP on our systems range from $539.99 to $799.99. That includes shipping, mount, etc. We also have a hydro-turn option for just $699.99. Here is some further information:

DENALI PRO Blade Information I.JPG DENALI PRO Blade Information II.JPG DENALI Standard Blade Information.JPG DENALI UTV Lift Arm Information.JPG




Thanks!

Peter
Motoalliance
 
1 - 20 of 61 Posts
Top