[McClain210]

Alright guys…im doing the RPM cat delete on my turbo rr and i broke this clip that holds the sensor wire to the can plastic. Its the push pin clip that goes in the wall right behind the passenger seat. I cant find the part number anywhere. This is the broken one in my hand.

 

[10mm_]

69

 

[McClain210]

69

??

 

[MO_Hacker]

Have you checked the schematic on partzilla? I have no idea if they will have it listed but it breaks down damned near every part on the machine.

 

[Speed Buggy]

If you are doing a gusset kit and shock tower brace there are a couple extra ones of those that are no longer used. I tried to find that clip for zip ties and could not. I did find the push in ones that have the pine tree grippers.

 

[McClain210]

If you are doing a gusset kit and shock tower brace there are a couple extra ones of those that are no longer used. I tried to find that clip for zip ties and could not. I did find the push in ones that have the pine tree grippers.

Thank you for the info! Do you know exactly where on the front end? I am doing gusset but not until next weekend. Id like to get this o2 wire tied up properly.

 

[ferrett21]

Drill a second hole next to where it goes, then use a zip tie looped through both holes to hold the wire in place..

 

[X3 Poor]

Drill a second hole next to where it goes, then use a zip tie looped through both holes to hold the wire in place..

I've done this in a couple places.... works like a charm.

 

[Speed Buggy]

Thank you for the info! Do you know exactly where on the front end? I am doing gusset but not until next weekend. Id like to get this o2 wire tied up properly.

Clips holding lights wiring to the radiator shroud. They move away from those positions to anchor when you put in a shock tower brace.

 

[Speed Buggy]

Drill a second hole next to where it goes, then use a zip tie looped through both holes to hold the wire in place..

I have too. Also have these to put an anchor anywhere you can drill a hole.

 

[Cage4Aged]

I have too. Also have these to put an anchor anywhere you can drill a hole.
View attachment 279999 View attachment 280000

Those are nice! Here's a couple of other options, too: Like above and Various reusable clips