Can-Am Maverick Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
202 Posts
Discussion Starter · #1 ·
I figured I would post these steps from the 2014 service manual for anyone that may come looking for it. I do not have a 2013 manual to see if it is the same procedure.

Maintenance Soon Message Manual Reset

1. Select PARK
2. Turn ignition switch to ON. Do NOT start engine.

NOTE:
Steps 3 through 9 must be completed within 5 seconds.

3. Press override button and HOLD.
4. Press and release brake pedal.
5. Release override button.
6. Press and release brake pedal.
7. Press override button and HOLD.
8. Press and release brake pedal.
9. Release override button.
10. Turn ignition switch to OFF.

NOTE:
Do not turn ignition switch to ON before the multifunction gauge turns off.
 
  • Like
Reactions: RiverRat1000

·
Registered
Joined
·
202 Posts
Discussion Starter · #3 ·
You're welcome.


Sent from my iPhone using Tapatalk
 
1 - 2 of 2 Posts
Top