Can-Am Maverick Forum banner

1 - 7 of 7 Posts

·
Registered
Joined
·
256 Posts
I have a black set on my 64" Rc, no issues and a great value. I did have to use locktite on the jam nuts but thats the only hiccup. Have 500+ miles on them already.

Sent from my SM-T720 using Tapatalk
 

·
Registered
Joined
·
281 Posts
I have the high clearance on my RC R with the upgraded rod ends, Not a single problem with them in 1000 miles, no squeaks either.
 

·
Registered
Joined
·
15 Posts
I just installed mine. Love em.
Some things I learned that may help if you are installing these.
-pay close attention to the top rods. The ends are different. I read here that newer productions are stamped. Mine were not.
-the rods allow for toe & camber adjustment. Adjust camber first as it will affect toe. The tech at LM UTV recommended zero or slightly negative camber. The toe I straight edged to the front.
image.jpg
 

·
Registered
Joined
·
206 Posts
I made my own radius rods.
Used 1.25OD x .120 wall chromoly tubing. Chromoly threaded bungs, FK rod ends.
Now everything is adjustable, toe and camber. I made a fixture that I can set each rod to exactly factory settings.
My stuff bolts right on and is super strong

267528
 
1 - 7 of 7 Posts
Top