Can-Am Maverick Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
189 Posts
FYI, us mud guys know that, even though the rad looks clean its not even close. The fan shroud is so close to the rad that after a few cleaning it gets packed and is unable to evacuate itself of dirt and debris no matter how much it looks to be clean on the front side. Best thing for this is to take shroud off and clean the rad really good (you'll be surprised at what you see come out!) then get you some stainless washers or a small spacer of sorts and put it between the rad and the shroud to give a little more room for the debris to wash out the back side so that it doesn't clogged up so easily. It has made a world of difference in helping keep the rad clean and efficient. And for sure go to your owners manual and do the bleeding process for each head on your cooling system. Hope this helps.
 
1 - 1 of 1 Posts
Top