Can-Am Maverick Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
30 Posts
Discussion Starter #1
I was doing a little experimenting with some underbody LED lights and came up with a pretty simple way of doing it. I got a roll of 5 Meter LED Strips with the 3m Adhesive that had the positive and negative wires at both ends. This allowed me to cut the strips in half and put 2.5 meters down each side. All hooked to a UTV Rock light rocker. Yellow of course!








5M 12V IP65 Waterproof 300 LED Strip Light 3528 5050 SMD String Ribbon Tape Roll | eBay
 

·
Registered
Joined
·
6,621 Posts
good idea & those are super bright!
 

·
Registered
Joined
·
403 Posts
I use those under cupholders in boats, and all other LED jobs in boats that go through my shop. Make sure to wire tie them, the adhesive tape won't hold up very long.
 
1 - 6 of 6 Posts
Top