Can-Am Maverick Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
208 Posts
Discussion Starter #1 (Edited)
KWI Clutching is an authorized Razorback Technology dealer, all models in stock and ready to ship now! Call direct at 4147881346 to discuss your machine specific setup. Or email us at [email protected] an we will get you set up.

Razorbacks revolutionary design uses an infrared sensor mounted on the clutch cover to monitor ACTUAL surface belt temperature in real-time. This data acquisition is paramount to monitoring the efficiency of your CVT clutches. KWI Clutching uses Razorback sensors when evaluating all our clutch tuning and has been able to substantially lower belt temps with this invaluable tuning tool.

Pricing as follows (plus shipping)
3.0 Edition Belt Temp Gauge $275
razorback 3.0.jpg
Razorback Technology 3.0 Edition Belt Temp Gauge monitors REAL belt temperature and displays current, average, and high temperatures on a LCD screen with multi-color LED alerts. Machined from solid aluminum, this gauge boasts a smaller profile than our other gauges, waterproof connections, and a sensor quick release at the clutch cover.
* Fits 2 1/16 Gauge Clusters/Pods
* Machined from Solid Aluminum Stock
* Anti-Glare LCD Screen
* Multi-Color LED Alerts
* Current, Average, and High Temperature Tracking
* Waterproof Sensor, Connections & Gauge
* Quick Release Sensor Harness
* One Year Warranty

2.0 Edition Belt Temp Gauge $260
razorback 2.0.jpg
2.0 Edition Belt Temp Gauge tracks actual belt temperature in real-time. Its anti-glare LCD screen displays not only current belt temperature but average and high temperatures as well. is gauge uses multi-color LED alerts to warn when belt temperatures reach a point where heat damage can occur.
* Fits 2 1/16 Gauge Clusters/Pods
* Machined from Solid Aluminum Stock
* LCD Screen
* Multi-Color LED Alerts
* Current, Average, and High Temperature Tracking
* Waterproof Sensor
* Water Resistant Connections
* Water Resistant Gauge
* One Year Warranty

1.0 Edition Belt Temp Gauge $215
razorback 1.0.jpg
Razorback Technology 1.0 Belt Temp Gauge was carefully designed and programmed to allow users to monitor belt temperatures as they ride. is gauge has been programmed to display current belt temperature in real-time on a high-contrast, OLED display with screen inversion alerts. Both the sensor and the wiring harness are waterproof, and the gauge is water-resistant.
* Fits 2 1/16 Gauge Clusters/Pods
* Machined from Solid Aluminum Stock
* OLED Screen w/ Screen Inversion Alerts
* Real-Time Temperature Tracking
* Waterproof Sensor
* Water Resistant Connections & Gauge
* One Year Warranty

Diff Lock Override Module Teryx $99
Diff lock override KAW TERX.png
Our Dif Lock Override Module bypasses the Teryx's di lock mph speed limiter and gives riders full throttle & power when in dif lock. Once dif lock is engaged and Module is active, the ECU will think the Teryx is in 4WD and will not limit mph driving. Easily installed & backed by lifetime warranty. Fits: 2012-2017 Kawasaki Teryx

Stainless Dash Plate (Can-Am) $18

Brushed Stainless Dash Plates
Perfect for mounting gauges over the storage recess located above the rocker switches on Can- Am Commanders and Mavericks. Machined from stainless steel. Available with one or three 2 1/16 holes.

Seat Belt Sensor Override $12
seat belt sensor override can am.png
Seat Belt Sensor Override is a plug-and-play modification that allows full power, regardless if stock seat belts are engaged. A must-have for UTV owners who have installed aftermarket harnesses and no longer require the use of factory restraints. Does not require cutting or splicing of wires.
Product Number: RBT4-Fits: Can-Am X3, Commander, Defender, and Maverick. Polaris RZR Turbo, RZR 1000, RZR 900, and Ranger.
RBT4K Fits: Kawasaki Teryx

Low Range Unlocker (Can-Am) $40
low range unlocker can am.png
Low Range Unlocker enables Sport Mode in low range by tricking the drive-by-wire system into thinking it is in high range. is drastically increases throttle response and acceleration. is is a plug-and-play modi cation that does not require splicing or cutting wires. Unlocker is water-resistant and undetectable when removed. Backed by lifetime warranty. Fits: 2012-2016 Can-Am Commander and Maverick (800-1000)
 
1 - 1 of 1 Posts
Top