Can-Am Maverick Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
202 Posts
Discussion Starter #1 (Edited)
Damn all 8 were tight as hell. I set them at .15 on the exhaust side and .10 on the intake. Got it done about 130am tonight so can't go cruise but starting it cold it idles MUCH better. Since they were so tight, can't wait to see how it runs now. This was part of my 10 hour service. But I've got about 20 hours on it now. I've been putting off doing the service cuz the 10 hour blows. Got it all done though thank God. Prior to the service my top speed was only 73. Hopefully since the valves were so tight it will improve. I've got a tune monster with dual auto tune so I'm gonna retune from scratch tomorrow and see how it goes. Spose to rain so might not be able to. That blows.


Sent from my iPhone using Tapatalk
 

·
Registered
Joined
·
875 Posts
I just did mine with 17 hours and observed the same thing as above. Intake was extremely tight. .002 wouldn't even fit. The exhaust side was good @.006 though.
 
1 - 4 of 4 Posts
Top