Can-Am Maverick Forum banner

1 - 7 of 7 Posts

·
Registered
Joined
·
806 Posts
Discussion Starter #1
When I first take off with little throttle in high or low range my rig will jerk and then smooth out.I have already checked the belt and did not notice any damage or flat spots. Never really noticed before. Wonderin if anyone else had this issue. By the way, my primary and secondary are stock.
 

·
Registered
Joined
·
707 Posts
If the belt looks shiny its done. I had the same problem, pulled my belt and sure enough it was glazed. Changed my belt, problem solved. I've already been through 3 belts.
 

·
Registered
Joined
·
2,067 Posts
Mines been a little jerky since new. Only way to avoid it is feed the throttle nice and smooth.
 

·
Registered
Joined
·
806 Posts
Discussion Starter #4
If the belt looks shiny its done. I had the same problem, pulled my belt and sure enough it was glazed. Changed my belt, problem solved. I've already been through 3 belts.
I dont think it ever slips, but I'm not sure. Really didn't pay attention if it was glazed. Do you ride slow in high range? Why so many belts? I'm guessin it's your drivin style. lol
 

·
Registered
Joined
·
10 Posts
Get an airdam clutch and it will eliminate your problems
 
1 - 7 of 7 Posts
Top