Can-Am Maverick Forum banner

1 - 14 of 14 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter · #1 ·
Hello everyone, I appreciate any help I can get to detect and understand what the problem is.

Maverick xds 2019

Error codes:
p0106 p0235 p006d

Already Tried to:
reset ECM
Clean the Map Sensor
Replace the Map Sensor
Check for boost leaks

and problem reappear when the engine starts.

Can you think of a way to detect the problem?:rolleyes:
 

·
Premium Member
Joined
·
12,177 Posts
Welcome from Tucson AZ. Any decent dealers by you?
 
  • Like
Reactions: Buskilos

·
Registered
Joined
·
1,966 Posts
those are sensor malfunction errors
check connections/ wiring or replace sensors
make sure your getting 5v to the sensors
they are not overboost errors
also there are two map sensors
the 4 wire is a temp-map
 

·
Registered
Joined
·
5 Posts
Discussion Starter · #9 ·
those are sensor malfunction errors
check connections/ wiring or replace sensors
make sure your getting 5v to the sensors
they are not overboost errors
also there are two map sensors
the 4 wire is a temp-map
Thanks for replying,
The sensors are clean and have 5v ... Probably not the case
 
1 - 14 of 14 Posts
Top