Can-Am Maverick Forum banner

1 - 13 of 13 Posts

·
Official Site Vendor
Joined
·
7,278 Posts
Discussion Starter #1 (Edited)
MAX_XRS-500x500_360x.jpg We have all of HCR's Kits and can piece out front or rear arms as needed.

Here is a link to the Elite front replacement A-Arms:


We have all of the HCR kits if anybody needs them. They are really nice and come with everything you need to replace your front A-Arms or Trailing Arms. I am impressed with HCR's product quality. I need the best parts to hold my machine together with the 35" tires.

HCR has the best welding I have seen on production suspension parts. I have been employed as an American Welding Society (AWS) Certified Welding Inspector (CWI) since 1992. I spent this time in the power industry certifying high pressure welds of exotic alloy steels that hold over 3000 psi pressure at 1000+ degrees F. I retired from that job to pursue my passion for off roading. I have personally visited the HCR shop and inspected their welding facility in Cedar City Utah a few years ago. I found their welding impressive and far above industry standards.

PM if you need info or a Forum discount on HCR Suspension products.

https://www.proutvparts.com/search?type=product&q=hcr
Attached Thumbnails
 

·
Official Site Vendor
Joined
·
7,278 Posts
Discussion Starter #7
Link to the 72" replacement Elite A-Arms

 
1 - 13 of 13 Posts
Top