Can-Am Maverick Forum banner

1 - 8 of 8 Posts

·
Registered
Joined
·
317 Posts
Discussion Starter #1
First thing I am putting in is harnesses. I have no idea what to expect here except that I am going to weld in a bar behind the seats. How do I attach the lap belt part of the harness? Will I need to weld tabs or?? I am not sure how the mav is set up.
 

·
Registered
Joined
·
61 Posts
Im sure you could use existing lap belt mounting bolt holes. if not you could Iloops bolts cut the stud off and weld loops on and get harnesses with the clips for easy removal.
 

·
Registered
Joined
·
3,127 Posts
Laps bolt back in same spots. Driver submarine belt, I drilled a hole in frame. I had to drill two holes in the channel, the first hole is just so I could keep pushing and drill the next hole. The second hole is the one I used. You can see the nut in the picture. Passenger, looks like I'm going to have to weld a tab.
 

Attachments

1 - 8 of 8 Posts
Top