Can-Am Maverick Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
175 Posts
Discussion Starter #1
Just passing along some information, several times I posted asking how the heck you get the wheel hubs off the Maverick and nobody seem to know. I understand the mudders out there don't take there hubs off very much, however us Duners do to sink the rear paddles. Well just to let everybody know yes the Maverick hubs are glued on with Loctite 253, in order to get them off you have to use a puller and a torch. Put torque on the puller and heat the spindle and the hub up you will then see it start to move as soon as it does crank on the puller and it will come off.
 

·
Registered
Joined
·
7,381 Posts
Thanks for the info....but can't you have your paddles aligned when you have them mounted?
 

·
Registered
Joined
·
227 Posts
my fronts came right off...just tapped inward with a brass pin and hammer..sucks you had to use a torch!!!
 
1 - 4 of 4 Posts
Top