Location: Charleston IL. 61920
Terms: Buyer pays ALL shipping, Paypal add 3%, Local pickup welcome!
2013 Commander X carbon edition. 952 miles, 76.2 hours on the machine.
This machine was rolled on the right side.....there is some damage to the plastics, and fender flares on the right side, on top of the cage damage. Everything else is in good condition. Machine ran and drove straight, no issues at all.
This is a list of the items available. I will add more as I get things removed. If there is no price yet, please PM a reasonable offer. Ill try to get things updated daily, but please bear with me as I work a day job as well and have a family!
I have added prices, some may be high, but gotta start somewhere. PM if there is something you need that is not listed.
-Complete engine, w/intake manifold/sensors/thru shaft/stator cover $2300
-Complete transmission w/4x4 actuator $sold
-Primary clutch $sold
-Secondary clutch $150
-PCM with both keys & ECM $sold
-Front driveshaft $100
-Rear driveshaft sold
-Voltage regulator $100
-Complete engine harness $100
-main wiring harness $250
-Coil $50
-Stock bead lock wheels pending sale
-Stock black X seats $sold
-ALL axles $125 each+shipping LF sold
-Front QE diff SOLD
-Rear Diff sold
-Headlights with housings $250
-Radiator w/cooling fan sold
-rear trailing arms SOLD
-front upper and lower control arms $100
-brake lines/calipers/rotors/master cylinder SOLD
-front spindles $50
-fuel tank w/pump sold
-complete frame w/clear title $750
-stock muffler $50
-power steering system w/steering shafts $750
-steering wheel $100
-steering rack w/tie rod ends $sold
-front bumper-some wear/paint chipped off $75
-rock sliders with rocker panels SOLD
-FOX X shocks $sold
-bare tailgate $75
-left fender flares front and rear $50
-seat belts $40
-door nets $sold
-glove box $35
-all interior plastic pieces/floor boards/etc make offer based on parts needed
-Black carbon X Plastics, complete set front to rear, left side scuffed up/light damage. sold
-Front plastic bumper cover/radiator guard thing? $30
-Bed release rod/handle w/hardware $40
-tail lights with plastic housings $lh available, RH sold
-Plastic cover below Pass. $20
-Plastic cover below Driv. $20
-over ride switch?
-Sport mode switch?
-stock CVT intake/exhaust tubes
-
Again, bear with me during this part out. I will be working to ship items as quickly as possible, but will have to acquire a lot o boxes and packing materials, so some larger items may take a few days to get out the door.
Please check my feedback on ebay and paypal (vtecgsr95). I also parted out a rhino and can am ATV a few years ago on another project, so I have a lot of feedback on the highlifter forum as well.
PM me or email [email protected] with questions.
Thanks!
Terms: Buyer pays ALL shipping, Paypal add 3%, Local pickup welcome!
2013 Commander X carbon edition. 952 miles, 76.2 hours on the machine.
This machine was rolled on the right side.....there is some damage to the plastics, and fender flares on the right side, on top of the cage damage. Everything else is in good condition. Machine ran and drove straight, no issues at all.
This is a list of the items available. I will add more as I get things removed. If there is no price yet, please PM a reasonable offer. Ill try to get things updated daily, but please bear with me as I work a day job as well and have a family!
I have added prices, some may be high, but gotta start somewhere. PM if there is something you need that is not listed.
-Complete engine, w/intake manifold/sensors/thru shaft/stator cover $2300
-Complete transmission w/4x4 actuator $sold
-Primary clutch $sold
-Secondary clutch $150
-PCM with both keys & ECM $sold
-Front driveshaft $100
-Rear driveshaft sold
-Voltage regulator $100
-Complete engine harness $100
-main wiring harness $250
-Coil $50
-Stock bead lock wheels pending sale
-Stock black X seats $sold
-ALL axles $125 each+shipping LF sold
-Front QE diff SOLD
-Rear Diff sold
-Headlights with housings $250
-Radiator w/cooling fan sold
-rear trailing arms SOLD
-front upper and lower control arms $100
-brake lines/calipers/rotors/master cylinder SOLD
-front spindles $50
-fuel tank w/pump sold
-complete frame w/clear title $750
-stock muffler $50
-power steering system w/steering shafts $750
-steering wheel $100
-steering rack w/tie rod ends $sold
-front bumper-some wear/paint chipped off $75
-rock sliders with rocker panels SOLD
-FOX X shocks $sold
-bare tailgate $75
-left fender flares front and rear $50
-seat belts $40
-door nets $sold
-glove box $35
-all interior plastic pieces/floor boards/etc make offer based on parts needed
-Black carbon X Plastics, complete set front to rear, left side scuffed up/light damage. sold
-Front plastic bumper cover/radiator guard thing? $30
-Bed release rod/handle w/hardware $40
-tail lights with plastic housings $lh available, RH sold
-Plastic cover below Pass. $20
-Plastic cover below Driv. $20
-over ride switch?
-Sport mode switch?
-stock CVT intake/exhaust tubes
-
Again, bear with me during this part out. I will be working to ship items as quickly as possible, but will have to acquire a lot o boxes and packing materials, so some larger items may take a few days to get out the door.
Please check my feedback on ebay and paypal (vtecgsr95). I also parted out a rhino and can am ATV a few years ago on another project, so I have a lot of feedback on the highlifter forum as well.
PM me or email [email protected] with questions.
Thanks!
