Can-Am Maverick Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
27 Posts
Discussion Starter #1
Anyone replace one of these.
There is a sensor wire connected to the banjo bolt at the MC.

Trying not damage anything in the process.
Can't seem to get the wiring harness detached from the car.

Anyways......
 

·
Premium Member
Joined
·
8,379 Posts
the wires dont unplug from the banjo bolt, look about 4” back above the steering column and you will find an inline plug.
 

·
Registered
Joined
·
27 Posts
Discussion Starter #3
Thanks Mega.

Yeah, I found the inline plug. Was able to disconnect it.
The issue is the side of the in-line plug that needs to be free has a plastic pin that locks it into place.

Looks like I will just have to force it out. Probably won't survive it, the pin that is.
Unless there is a trick.
 

·
Premium Member
Joined
·
8,379 Posts
It’s just a plastic barb that pushes through a hole in the steering column. Fork looking screwdriver pops them out easily.
 
1 - 4 of 4 Posts
Top