Front and back windshields I made
1 - 20 of 20 Posts
Joined
·
546 Posts
Nice job they look good.. How much you want to make another front ?
Joined
·
144 Posts
Joined
·
87 Posts
I used ¼ inch lexan and cut it with a jig saw, the trim and quick clamps are is off eBay and I can give the links. I have the pattern on a heavy piece of cardboard. Would have to somehow put that on paper to be able to send it. It’s not that hard to make the pattern just takes time and a large piece of cardboard.
Joined
·
546 Posts
I'd be intrested in the clamp.link
Joined
·
87 Posts
Joined
·
144 Posts
Where did you get the 1/4" lexan?
You can get them cheaper at Granger. A pack of 10 for $13.
GRAINGER APPROVED VENDOR Clamp, Clamp Dia 2 In, 1/2 In W, PK 10 - Cable, Wire and Hose Clamps - 1BAE3|COL3209Z1 - Grainger Industrial Supply
GRAINGER APPROVED VENDOR Clamp, Clamp Dia 2 In, 1/2 In W, PK 10 - Cable, Wire and Hose Clamps - 1BAE3|COL3209Z1 - Grainger Industrial Supply
Joined
·
45 Posts
How did you bend the back windshield?
Joined
·
413 Posts
Thanks for the links to the moldings!
Joined
·
87 Posts
I did it with a heat gun and it took awhile,so would be better with two people and 2 guns. I bent it on the machine.
Joined
·
728 Posts
This is not fair. Snow riding is sooo much fun and I have only got to do it 3 or 4 times.
1 - 20 of 20 Posts
Join the discussion
Join now to ask and comment!