Under the seat. get a pump with that pushes the most volume you can afford

 

By far the he best pumper on the market!

https://www.ruggedradios.com/index.php?main_page=product_info&cPath=517&products_id=2185

 

We'll be in Pomona, CA at the Offroad Expo this weekend if you want to stop by and test out our M3 pumper system.

We'll also be having a sale online for the Offroad Expo that includes the M3 pumper.

 

Pci pumper

 

What are you using to hold your hose in the first picture


Sent from my iPhone using Tapatalk

 

2nd on the rugged M3 Two Person Air Pumper.....Geiser makes a cool bracket that gives you a few mounting options

www.geiserperformance.com/collections/can-am/products/rugged-air-pumper-mount

 

I mounted mine between the seats on the engine access panel. Put a plug to disconnect wiring and pop cover off when you need to.

 

I have both the Rugged Mac 3.2 and the PCI Race Air. I differnt cars. I prefer the PCI because it has the Roll Bar mounts included for 1.5"/1.75" or 1.85"/2.5". Rotate the bracket 90 degrees to change between 1.5" and 1.75" or 1.85" and 2.5". Also has integrated Variable Speed Controller. Rugged the Variable Speed Controller is a separate purchase, as well as the Roll Bar Mount.

As far as function, they both work equally as well. Rugged wins the looks with the Blue Carbon Fiber.

 

I have rugged and it works awesome the hose hangers work great also

 

You can move it down between the seats

 

View attachment 220560 View attachment 220562

You can move it down between the seats

What bracket did you go with? Looks like a nice set up!

 

We offer a bolt on mount for the PCI Dual Race Air system. Click on the link below for more details.

LINK: https://www.utvinc.com/utv-inc-can-am-maverick-x3-clamp-on-pci-dual-race-air-mount/

 

digging up an old thread using the SEARCH function.

Any new info on fresh air? I heard the new Rugged one and its super loud.

 

You dumb sob. Don't you know you can just ask the same effing question over and over and some poor sheep will respond LOL.. Did you happen to check out the new air pumper from S&B at the Sand Show? Looks like a mini particle separator and think they said it should be available next month. I am leaning towards going with that one especially after watching my buddies dealing with clogged filters on their Rugged and PCI setups.

 

A lot of noise from air pumpers can be attributed to your helmet setup. Many times, helmets with a side air inlet direct the incoming air straight at your microphone, so you get to hear the actual air itself as well as the amplified sound of the air through your intercom. Helmets with a top or top offset inlet are much quieter.

 

So I got majority of my rugged coms and pumper installed tonight. I'm at a roadblock as to where to mount the Variable Speed Controller. I was hoping to run it in place of the start button on their mount but the shifter knob hits it in park. I'm leaning towards left of the steering wheel on the dash right above/behind the left side switches. I was thinking of running it inside the iPad mount but went against that being I wanted it in a accessible spot to adjust if needed.

Does anyone have any other clean spots where you've mounted yours? Hoping it's just late and I'm not thinking.

 

after two trips with my pumper I run it on 100%, just like others in my group. The Rugged controller is a poorly designed hard to place unit. I have mine on the right side of the dash next to the key going forward and aft. I will be removing it and just running an on/off switch. And eventually a switch Pro.

 

 

View attachment 225575

The new style box mounts differently and makes it really hard to mount cleanly.

 

I mounted mine in front of the passenger into the dash/glovebox.

Sent from my iPhone using Tapatalk

 

This how I did my blower control and how I mounted the pumper

 

I'd be worried mounting the pumper in front of the air path for the intercooler? No?

 

NO, the intercooler uses a fan to draw air not wind speed air to cool.

But damn that loud ass fan in the pumper is annoying and I couldn’t imagine it that close to my ear even with a helmet on.

 

Got mine all mounted up yesterday, didn’t really have a good place for the controller, so I made a panel for the top of the cage.

 

Be careful with the zip ties holding the hoses. The material between the ribs is very thin and could be cut by the plastic zipties. I used strips of double sided soft Velcro.

Also, that fan near your head will drive you nuts. Damn thing is super loud.

 

I used velcro straps to hold the tubes where I wanted them. Works great.

 

Yeah I have to get some of those Velcro straps. [emoji1417]

 

Mike621 what clamps did you use to mount it at the top of your cage?

 

Mike may not be on here much he just bought a PoPo

Barbara

Sent from BLR Logistics