Can-Am Maverick Forum banner

1 - 14 of 14 Posts

·
Registered
Joined
·
163 Posts
Yes but DAMN. It takes some modding-
Full report to follow

I was wondering if the rear hard poly window for the commander will also fit on the maverick. I figure that it would since i was told that the cage is the same but, was wondering if anyone knew for sure?
 

·
Registered
Joined
·
998 Posts
Yeah it'll fit.. I have the rear windscreen from a commander limited on mine.. Fits perfect
 

·
Registered
Joined
·
998 Posts
My doors should be in anytime. I went with the pro armor commander doors. How much extra work is there involved fitting the commander doors to a maverick?
 

·
Registered
Joined
·
1,319 Posts
I can't really say since mine were blingstars and I think there was a little more involved with mine since it has the aluminum panel behind the door. But in my case the drivers door had to be moved back about 3/4" or so. The rear hinge bracket had to be shortened/modified were it mounts to roll cage and latch pins had to be relocated to put it briefly. Some body plastic also had to be trimmed.
 

·
Registered
Joined
·
649 Posts
Discussion Starter #9 (Edited)
Ok so I got the Latest version of commander doors from Pro Armor... The mounting of these doors will take you most all day...And thats taking a 15min Lunch break... Most every part has to be modded in some way to get a proper fit... The problem is that little V part of the new plastic where the top front of the door goes... Therefor you have to move the doors backwards to compensate... Thus enlarging wholes and shorting ends...Lots of time consuming try it 20 times for a perfect fit type stuff..

Then when you have the doors mounted you go to the Pins... This is where you can basicly throw away the directions except for the part where you drill the frame and mount the bracket....I ended up using the bracket on the oppsite sides because it was the only way it would work... I took some pics so you can see whats involved.. Ole yea. You will need to trim some body panels too
 

Attachments

·
Registered
Joined
·
164 Posts
I went with the Blingstar commander doors after talking with SickStick and i have the passanger door on and went really smooth just took my time trimming the plastic but i havent had a chance to get to the drivers door just yet. But I personally like the look of the commander doors over any of the maverick doors out.
 

·
Registered
Joined
·
1,319 Posts
I totally agree with you. I haven't seen any other doors I like as well as my Commander Blingstar doors on my Mav. Even the Blingstar doors made for the Mav aren't very appealing.It was definately worth the extra work IMO.
I went with the Blingstar commander doors after talking with SickStick and i have the passanger door on and went really smooth just took my time trimming the plastic but i havent had a chance to get to the drivers door just yet. But I personally like the look of the commander doors over any of the maverick doors out.
 

·
Registered
Joined
·
120 Posts
I totally agree with you. I haven't seen any other doors I like as well as my Commander Blingstar doors on my Mav. Even the Blingstar doors made for the Mav aren't very appealing.It was definately worth the extra work IMO.
what do you see as the diff..?
 
1 - 14 of 14 Posts
Top