Can-Am Maverick Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
468 Posts
Discussion Starter #1
Guys. Just a heads up. Ur cvt exhaust outlet in the front has a tendency to come off due to vibration. Especially once u pull it off once, its a bitch to get it to stay on. For the mud guys this is an absolute must that this thing stay on. The reason it pops off is its a very slick surface and there's not much for the rubber coupling to grab onto. I pulled off mine and scuffed the hell out of the surface then reinstalled it. It now holds like a champ.
 

·
Registered
Joined
·
164 Posts
I took my plastics off to access the belt and found that my exhauset boot on the front the clamp wasnt even tight from the factory.
 

·
Premium Member
Joined
·
8,276 Posts
when i pulled the cover to replace my belt at 411 miles my front clamp was a little looser than i would like but the boot was still inplace. Just another thing to take a look at it.
 

·
Registered
Joined
·
468 Posts
Discussion Starter #5
Sorry Playdoh no pics. The reason it gets loose is because the outlet off of the housing is tapered down. The clamp is able to slide down it and the further it slides the looser it gets
 

·
Registered
Joined
·
468 Posts
Discussion Starter #6
If ur clamp is loose then it isnt water tight as how I like mine to always be.
 
1 - 6 of 6 Posts
Top