Can-Am Maverick Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
Hi guys, so I have a 2015 Can Am Maverick Turbo. I was an idiot and let my buddy drive it the other day. Obviously he flipped it. Now the sway bar is out of adjustment. I'm trying to remove the arm that holds up the A arm, but with no luck. I've even tried jerking it with the truck and a ratchet strap, it just pulls the machine along with it. Here is a quick video of what I'm talking about. Any help would be so appreciated!
 

·
Premium Member
Joined
·
7,678 Posts
You need to get the pressure off of it.

Have you jacked up the arm?

Maybe even take the shock off. Tim
 

·
Registered
Joined
·
2 Posts
Discussion Starter · #3 ·
You need to get the pressure off of it.

Have you jacked up the arm?

Maybe even take the shock off. Tim
Hi tim, thanks for the response! There is no pressure on it as I have removed the A arm that connects it to the wheel and suspension.
 

·
Registered
Joined
·
4 Posts
I had to use a ball joint separator to get the end links off. I never tried taking the arm off, but I assume it would be much easier with the end links off.
 
1 - 4 of 4 Posts
Top