[omkdriving]

I had the drive belt break after 22 hours. I put on a new one and went 4 feet and the driven pulley came off the shaft due to the bolt backing out. Only damage was to a piece I don't know the name of but it has 3 points that fits into the inside half of the pulley and has insulation of it. Some of the insulation was taken off and marked up the pulley. Any one have this happen? I ride mostly in dunes. Anyone have any experience with after market clutches?

 

[Benzo]

yup sum have done this take it back to dealer they will fix it all up get u new belt maybe even and make sure latest recall was done and make sure they use loc tite and tq it right !

 

[vquad]

pictures?

 

[heavysledz]

sounds like you have just experienced a common problem that is addressed under a recall. Do you know if you have the latest recall done on your clutches? Page 8 of the recall covers the proper installation of the driven (secondary) clutch. Here is the link to the recall

http://www.maverickforums.net/forum/7-general-maverick-discussions/3430-can-am-recall-full-document.html

 

[omkdriving]

Thanks for the info. Looks like I will be calling the dealer.

 

[heavysledz]

no problem.....glad to help.