Can-Am Maverick Forum banner

big tire thread for X3??

522K views 493 replies 159 participants last post by  GloverXRS  
#1 · (Edited by Moderator)
Has anyone started a thread on running bigger tires for the X3? What fits? What works? What needs to be done? Clutch job? Lift? I couldn't get the search function to work. I'd like to run bigger tires on a DS.
 
#221 ·
View attachment 134954 32 outback max on sti 17 inch rims. Of coarse they are 5+2 so no clearance issues. 1800km .. no belt issues, no clutching. Measures out at 17 inch clearance and 68 width . LOVE IT!!!!!!
So I looked up your tire spec. It shows 52lbs on the tire. You say no issues. Reading the forums a lot of people talk about tire weight being a serious issue to the belt and performance. Have you seen any decline in power or quickness? I am looking at an EFX steal belted radial in a 32 that is rated at about 46-48 lbs. The tire looks great! I am tempted to try it. I have not seen many steal belted radial tires for a UTV. Thanks
 
#136 ·
After using 30" and 31" tires, I wanted to try some 32's for the appropriate terrain. I went with the Arison Aftershock 32's. I have two sets of wheels in 4/3 and 5/2 offset. I put the 32's on my 4/3 set and will say it sucks. I got way too much steering feedback from this setup and the steering got much slower. Now this is in pretty rough rocky terrain so keep that in mind. I'll put the 32's on my 5/2 set next and hopefully that will be the winning setup. I'm temped to buy a 6/1 offset set as well which would put me back to stock. I haven't found the wider setup to be any better as this buggy is very stable already. The wide setup just seems to cause too much negative impact through the steering system/wheel.

I had some ITP Ultracross 31's on this 4/3 wheel and that was an ok setup but that ITP tire is very narrow as compared to other tires in the 10" wide typical sizing.

 
#142 ·
I've decided to go with 32 Tensor Regulators on my DS but I haven't made up my mind on what size (14 or 15-inch rims) yet. I'm not sure what offset I'd need to run and I'd prefer to avoid beadlocks because I have no use for them and would like to avoid the additional expense. I'd appreciate any comments/experiences from those that have done it. Thanks in advance!
 
#150 ·
Ride is in the shop for it's 6000 km service. Getting new tires on at same time. Going to try the BFG KM2 33 x 10.5 x 15 this time. I am using the HD5 Beadlock and the shop is telling me they cannot get the BL on due to the extra width of the BFG's. There was no issue with the Chicane RX tires, but being as the BFG's are true truck tires they are thicker. Is the solution as simple as getting longer bolts to mount the BL?
 
#162 ·
You guys do know that BFG makes a UTV specific tire. They have a new 32" tire that supposedly measures out to 33". Jagged X has been running them on their BITD car.


Sent from my iPhone using Tapatalk