Joined
·
8,276 Posts
2013 CanAm Maverick XRS for sale
This sxs is dialed in for the dunes, all of the upgrades are already done, headers wrapped and cat hollowed out to keep cabin cooler, tie rods replaced with solid 7/8" aluminum, all suspension points and steering rack have gussets, clutches replaced with STM and professionally tunned by Adam at //Airdam, stock restrictive airbox has been removed and a 4" CBM airfilter with outerware installed, coolant temp gauge installed to keep an eye on engine temps, volt gauge installed to keep an eye on battery( you will not need to pay attention to this due to the large Interstate AGM battery), custom rollcage with 5 point harness and PRP seats to keep you safe, two led lights on hood that replace stock dim halogen and over head actuated Rigid lights to see you way at night, shocks have been revalved to lessen the G-outs in the dunes and run the woops at 65mph, Rugged radio car to car kit, THE PERFECT sand tires for agressive dune shreading.
$22,000 cash only no trades, i dont need to sell it so keep your lowball offers to yourself, over 12k in upgrades over stock
located in Mesa, AZ
the specifics:
1583 miles
97.8 hours
AZ street legal(horn, rear view mirror, license plate light)
Utv Inc front end gusset kit
Holz stering rack brace
custom aluminum vented front splash guareds
custom front bumper
4" stainless steel intake with CBM filter and outerware
STM Rage 6 primary professionally tuned by //Airdam
STM gen 1 secondary professionally tuned by //Airdam
front shocks revalved for dunes
rear shocks revalved for dunes
Utv Inc rear suspension weld on gusset kit
PRP seats (drivers side lowered)
Utv Inc 5 point harness
Utv Inc custom 1.75" rollcage
custom half roof held on with Dzus tabs
two amber Quick light fiberoptic whips with custom Utv Inc switch
Rugged radio car to car 50watt radio (Utv Inc radio mount)
PCI Race Air "parker pumper system" for freesh air to helmet with custom Utv Inc switch
Rigid Industries dome light with custom Utv Inc switch
headlights replaced with LED cube lights adapter kit from DezertFreak Products
Mr Rpm 3 port Baldwin oil filter adapter(not installed)
large fire extinguisher
Interstate MT7 AGM battery with custom mount and remote posts for easy access
small cooler
two Rigid SR 10" and one Rigid SR30" led light barsa on custom actuated lightbar with Utv Inc custom switches
mount for Lowrance GPS (gps not included)
custom 7/8" aluminum tie rods
sand tires
front smoothies 27x9x12 on 12x7 .50 Calibur Racing beadlocks
rear Skat Tracks 26x12.5x12 7 paddle on .50 Calibur Racing beadlocks
stock XRS beadlocks and tires barely used
custom rear fender supports made from aluminum
grey key programmed for full power
headers wrapped to keep cabin cool
catalytic converter hollowed out
3/8" UMHW skid plate
1 spare CanAm 212 belt
Utv Inc 2 gauge panel with Auto Meter carbon fiber volt gauge and coolant temperature gauge
custom twin "oh chit" handle at center console
Go Pro mount
12 place fuse panel behind center console
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
This sxs is dialed in for the dunes, all of the upgrades are already done, headers wrapped and cat hollowed out to keep cabin cooler, tie rods replaced with solid 7/8" aluminum, all suspension points and steering rack have gussets, clutches replaced with STM and professionally tunned by Adam at //Airdam, stock restrictive airbox has been removed and a 4" CBM airfilter with outerware installed, coolant temp gauge installed to keep an eye on engine temps, volt gauge installed to keep an eye on battery( you will not need to pay attention to this due to the large Interstate AGM battery), custom rollcage with 5 point harness and PRP seats to keep you safe, two led lights on hood that replace stock dim halogen and over head actuated Rigid lights to see you way at night, shocks have been revalved to lessen the G-outs in the dunes and run the woops at 65mph, Rugged radio car to car kit, THE PERFECT sand tires for agressive dune shreading.
$22,000 cash only no trades, i dont need to sell it so keep your lowball offers to yourself, over 12k in upgrades over stock
located in Mesa, AZ
the specifics:
1583 miles
97.8 hours
AZ street legal(horn, rear view mirror, license plate light)
Utv Inc front end gusset kit
Holz stering rack brace
custom aluminum vented front splash guareds
custom front bumper
4" stainless steel intake with CBM filter and outerware
STM Rage 6 primary professionally tuned by //Airdam
STM gen 1 secondary professionally tuned by //Airdam
front shocks revalved for dunes
rear shocks revalved for dunes
Utv Inc rear suspension weld on gusset kit
PRP seats (drivers side lowered)
Utv Inc 5 point harness
Utv Inc custom 1.75" rollcage
custom half roof held on with Dzus tabs
two amber Quick light fiberoptic whips with custom Utv Inc switch
Rugged radio car to car 50watt radio (Utv Inc radio mount)
PCI Race Air "parker pumper system" for freesh air to helmet with custom Utv Inc switch
Rigid Industries dome light with custom Utv Inc switch
headlights replaced with LED cube lights adapter kit from DezertFreak Products
Mr Rpm 3 port Baldwin oil filter adapter(not installed)
large fire extinguisher
Interstate MT7 AGM battery with custom mount and remote posts for easy access
small cooler
two Rigid SR 10" and one Rigid SR30" led light barsa on custom actuated lightbar with Utv Inc custom switches
mount for Lowrance GPS (gps not included)
custom 7/8" aluminum tie rods
sand tires
front smoothies 27x9x12 on 12x7 .50 Calibur Racing beadlocks
rear Skat Tracks 26x12.5x12 7 paddle on .50 Calibur Racing beadlocks
stock XRS beadlocks and tires barely used
custom rear fender supports made from aluminum
grey key programmed for full power
headers wrapped to keep cabin cool
catalytic converter hollowed out
3/8" UMHW skid plate
1 spare CanAm 212 belt
Utv Inc 2 gauge panel with Auto Meter carbon fiber volt gauge and coolant temperature gauge
custom twin "oh chit" handle at center console
Go Pro mount
12 place fuse panel behind center console
