Clean wiring job.
This is a discussion on My 2019 Maverick Sport 1000R "Build" within the Maverick Builds, Projects, How-Tos forums, part of the Can-Am Maverick Forums category; Hey Everyone! Attached are photos of my Machine. If anyone has questions please feel free to ask. Ive got roughly 900 miles on it with ...
Attached are photos of my Machine. If anyone has questions please feel free to ask. Ive got roughly 900 miles on it with Zero issues. Nothing on the electrical system has power unless the key is on. The Fuse Block is mounted behind the glove box on a plate of plastic from Hardware Store.
EMP Lightbar Mount
Can Am Dome Light
40" KC C Series Lightbar
KC Cube Flood Backup Lights
Garmin GPS 64 with Ram mount
SuperWinch 4500lb Cable Winch
Blue Sea Systems Split Fuse Block #5032
Quadboss 85L Expedition Series Cargo Box
Custom Cooler Racks - Cut Down Milk Crates
Adrenaline Cycles BRP Style Switches (They match Can-Am's amber color lighting - Amazon)
Rear Hitch Shackle and Anti-Rattle bracket - Amazon
Im sorry in advance if the photos dont work correctly. Still learning how to operate the forum. I have not participated in many forums before.
Last edited by HUGHSEY82; 01-18-2019 at 08:13 PM.
Clean wiring job.
Have a Delightful, Rainbowey, Unicorny day.
Me and My RC , whats good enough for other folk ain't good enough for me.
sweet, need some action videos!
Life's a game, play to win because no one gets out alive.
I have the same machine, I will be installing a winch in the next month. My question, did you need to purchase a seperate winch mount plate or did it bolt right up to the original plate.
Kenner - The winch does not need a plate. If I were you Id go with a superwinch 4500lb Steel cable model. I also did NOT use the can am wiring harness. It is not necessary if you have wiring knowledge or a buddy that has done a few winches before. Thanks for checking out the build!
Sometime in the next few months Ill be doing 30" tires and fender flares. Maybe some other small mods but I am VERY happy with the machine thus far.
Last edited by HUGHSEY82; 02-06-2019 at 04:08 PM.
What did you use for a relay? Where did you source the added fuse panel?
Im really starting to dig the look of the updated Maverick model. Clean setup man 👍
Great job. Nice looking ride. Great wiring job.
Did you need to remove the complete front bumper and plate assy. in order to install the winch? The Can Am installer website show a lot of things need to come apart in order to install winch.
I thought maybe there would be enough room to slide the winch in from the side with out removing half of the items Can Am says you need to remove.
I thought you may have a couple of tricks towards the install that would make it easier.
Kenner - The winch should come with a relay and general wiring kit. I just wired it into the rocker switch shown in the photo. The only thing I removed to install the winch was the steel winch plate that it gets bolted to.
The fuse block is from Blue Sea Systems part #5032, purchased from Amazon. This fuse block has 2 separate positive circuits and 1 ground circuit.
I made the fuse block mounting plate from plastic sheet from a hardware store. It is mounted behind the glove box. Glove box is easily removed with only 2 bolts.
If anyone has specific wiring questions feel free and Ill do my best to explain.
Thanks for the compliments!