clutches/ one way bearing
Can-Am Maverick Forum - Powered by vBulletin

clutches/ one way bearing

This is a discussion on clutches/ one way bearing within the Maverick XXC forums, part of the Can-Am Maverick Forums category; im at 2600 miles on my XC, all stock, never replaced the belt before. i will be replacing it now just to put a new ...

Results 1 to 3 of 3
  1. #1
    Member santander's Avatar
    Join Date
    Nov 2017
    Location
    Sunnyvale, CA, Earth
    Posts
    44
    Member #
    36602
    Liked
    9 times

    clutches/ one way bearing

    im at 2600 miles on my XC, all stock, never replaced the belt before. i will be replacing it now just to put a new belt in there, question is, is the one way bearing necessary to change?

    any special tool i need to swap the one way bearing?
    i alrady have the oem genuine belt

  2. #2
    Senior Member Cal16's Avatar
    Join Date
    May 2018
    Posts
    334
    Member #
    46489
    Liked
    122 times
    You need a tool to to pull your clutch off and with that many miles I would pull both clutches off and clean them up good and make sure your wear part's are all within spec and yes change your one way bearings I do every 1000 miles for good measure or at least grease them with the isoflex grease that is recommended..I assume you have never done this before so I highly recommend that you buy a service manual it will tell you exactly how to do it correctly

  3. #3
    Junior Member StewPidass0's Avatar
    Join Date
    Oct 2013
    Posts
    15
    Member #
    1970
    Liked
    3 times
    Is the 1000mi interval the factory recommended (can't locate my manual at the moment)?

Sponsored Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Similar Threads

  1. Replies: 0
    Last Post: 01-15-2015, 07:22 PM
  2. question about one-way bearing and friction washer
    By chim-chim7 in forum Engine and Drivetrain
    Replies: 43
    Last Post: 11-11-2014, 11:11 AM
  3. one way cvt bearing
    By wood tick in forum Engine and Drivetrain
    Replies: 41
    Last Post: 11-04-2014, 10:38 AM
  4. Greasing the one way bearing in clutch?
    By 02sunsetorangeZ in forum Maverick Discussions
    Replies: 16
    Last Post: 10-28-2014, 11:56 PM
  5. One way bearing on the CVtech Primary clutch
    By 01Cummins in forum Engine and Drivetrain
    Replies: 12
    Last Post: 12-18-2013, 08:43 PM