X3 Sparco Seat Bases
Can-Am Maverick Forum - Powered by vBulletin

X3 Sparco Seat Bases

This is a discussion on X3 Sparco Seat Bases within the UTV Inc forums, part of the Can-am Maverick Supporting Vendors category; - Direct OEM Fitment – Slider Stays Intact - Bases Are Designed For Sparco EVO II US Seats - Sold As A Pair (Driver & ...

Results 1 to 9 of 9
  1. #1
    Official Site Vendor UTV Inc's Avatar
    Join Date
    Sep 2012
    Posts
    5,257
    Member #
    32
    Liked
    477 times

    X3 Sparco Seat Bases

    - Direct OEM Fitment – Slider Stays Intact
    - Bases Are Designed For Sparco EVO II US Seats
    - Sold As A Pair (Driver & Passenger)
    - Allows Full Usage Of OEM Adjustability
    - CNC Laser Cut, Bent & Powder Coated In The USA!

    Mounting Sparco EVO II US seats into your Can Am Maverick X3 has never been easier! The UTV INC Sparco EVO II US seat bases will bolt directly into your Can Am Maverick X3 SXS model and allow full usage of the OEM slider and height adjustability. Sold as a PAIR, (2 pieces), and are designed to hold a Sparco EVO II US. Instructions and hardware to mount seat to supplied bases are included.

    $150.00

    Available here: https://www.utvinc.com/utv-inc-can-a...e-adapter-kit/
    Available here: https://www.amazon.com/dp/B07VGNJ6JW?ref=myi_title_dp
    Attached Images Attached Images       

  2. #2
    Supporting Member
    Premium Member
    Desertdog01's Avatar
    Join Date
    Aug 2018
    Location
    Some where in Santa barbara ca.
    Posts
    1,522
    Member #
    49290
    Liked
    864 times
    Nice , I like that you can still get Bent in the us
    Life doesent get much better than eating taco’s down at scorpian bay ,baja sur
    2018 x3 xrs/ smart lok,rugged radios,baga design squadron pro’s,onyx6,afx alum. Lower doors,brp door handles, Evo c/d + tune, wet sounds elite 10, aim belt temp, + way too much to list need more $$ not close to being done

  3. #3
    Official Site Vendor UTV Inc's Avatar
    Join Date
    Sep 2012
    Posts
    5,257
    Member #
    32
    Liked
    477 times
    This item is in stock and ready to ship.

  4. Remove Advertisements
    MaverickForums.net
    Advertisements
     

  5. #4
    Official Site Vendor UTV Inc's Avatar
    Join Date
    Sep 2012
    Posts
    5,257
    Member #
    32
    Liked
    477 times
    Want to run some Sparco EVO II US seats in your X3? UTV INC has you covered with our X3 Sparco seat bases.

    LINK: https://www.utvinc.com/utv-inc-can-a...e-adapter-kit/

  6. #5
    Official Site Vendor UTV Inc's Avatar
    Join Date
    Sep 2012
    Posts
    5,257
    Member #
    32
    Liked
    477 times
    - Direct OEM Fitment – Slider Stays Intact
    - Bases Are Designed For Sparco EVO II US Seats
    - Sold As A Pair (Driver & Passenger)
    - Allows Full Usage Of OEM Adjustability
    - CNC Laser Cut, Bent & Powder Coated In The USA!

    Mounting Sparco EVO II US seats into your Can Am Maverick X3 has never been easier! The UTV INC Sparco EVO II US seat bases will bolt directly into your Can Am Maverick X3 SXS model and allow full usage of the OEM slider and height adjustability. Sold as a PAIR, (2 pieces), and are designed to hold a Sparco EVO II US. Instructions and hardware to mount seat to supplied bases are included.

    LINK: https://www.utvinc.com/utv-inc-can-a...e-adapter-kit/


  7. #6
    Official Site Vendor UTV Inc's Avatar
    Join Date
    Sep 2012
    Posts
    5,257
    Member #
    32
    Liked
    477 times
    In stock and ready to ship!

  8. #7
    Official Site Vendor UTV Inc's Avatar
    Join Date
    Sep 2012
    Posts
    5,257
    Member #
    32
    Liked
    477 times
    Check out our new UTV INC. X3 Sparco EVO II seat bases.

    LINK: https://www.utvinc.com/utv-inc-can-a...e-adapter-kit/


  9. #8
    Official Site Vendor UTV Inc's Avatar
    Join Date
    Sep 2012
    Posts
    5,257
    Member #
    32
    Liked
    477 times
    Need to mount some Sparco EVO II seats in your X3?

  10. #9
    Official Site Vendor UTV Inc's Avatar
    Join Date
    Sep 2012
    Posts
    5,257
    Member #
    32
    Liked
    477 times
    UTV INC CAN AM MAVERICK X3 SPARCO EVO II US SEAT BASE ADAPTER KIT
    - Direct OEM Fitment – Slider Stays Intact
    - Bases Are Designed For Sparco EVO II US Seats
    - Sold As A Pair (Driver & Passenger)
    - Allows Full Usage Of OEM Adjustability
    - CNC Laser Cut, Bent & Powder Coated In The USA!

    Mounting Sparco EVO II US seats into your Can Am Maverick X3 has never been easier! The UTV INC Sparco EVO II US seat bases will bolt directly into your Can Am Maverick X3 SXS model and allow full usage of the OEM slider and height adjustability. Sold as a PAIR, (2 pieces), and are designed to hold a Sparco EVO II US. Instructions and hardware to mount seat to supplied bases are included.

    LINK: https://www.utvinc.com/utv-inc-can-a...e-adapter-kit/


Sponsored Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Similar Threads

  1. Bump seat (child seat in middle)
    By Slow Matt in forum Maverick X3
    Replies: 10
    Last Post: 05-20-2018, 05:42 PM
  2. Sparco seats
    By Sennax in forum Maverick X3
    Replies: 19
    Last Post: 01-29-2018, 08:25 PM
  3. Anyone ever swap frames 2 seat to 4 seat?
    By Megadesertdiesel in forum Maverick Discussions
    Replies: 14
    Last Post: 08-23-2016, 10:07 PM
  4. Seat lowering bases
    By sandfreak in forum Maverick Discussions
    Replies: 2
    Last Post: 12-20-2015, 09:09 PM
  5. Seat mods to go back further on Max XDS and why no adjustable passenger seat?
    By sandfreak in forum Maverick 15-16 XDS/XRS Non-Turbo
    Replies: 5
    Last Post: 01-25-2015, 10:12 PM