Can-Am Maverick Forum banner

Walker Evans X3 Sway Bar Shocks from Pro UTV Parts

50K views 282 replies 51 participants last post by  craigstumph 
#1 · (Edited)
In Stock!

https://www.proutvparts.com/collect...cts/rear-sway-bar-shock-canam-by-walker-evans

Walker Evans Sway Bar Shocks are like miniature Walker Evans shocks with 1.5” of travel. The sway bar shocks dampen the rear suspension as it transitions into the rear swaybar. The stock swaybar links use rubber bushings that have a little bit of give to provide some dampening effect. The Walker Evans sway bar shock goes beyond the capability of the stock links to smooth out the swaybar transitions.

Body roll is increased. The body roll is not significant because control is gained in corners and uneven terrain. The ride is improved over the little rough sections that the stock suspension does not like. This is the terrain that rattles your teeth and everybody dislikes with the Fox shocks. Using one link has less effect than two links. Most people are using two links.

The effect is most pronounced in places where one tire rear tire is in a hole and the other is on a high spot. Rock crawling is also improved using these links because the rear sway bar connects both sides of the rear suspension and the Walker links let the suspension work. The Walker links are providing 1.5” of slack before fully engaging the sway bar.

No matter if you are running stock Fox, we can improve your driving experience with a set of “Walker Links”. These units replace the standard rear sway bar link and provide a smoother initial ride over rough and uneven terrain regardless of vehicle speed while still providing a confident feeling while cornering. With 1.5 inches of dampened action per side your rear shocks will be able to act independently until a point where the Walker Link has collapsed enough to now act like a rigid link under heavy loads and when cornering. You get the best of both worlds with these links, a more independent shock action at the initial stroke and a solid support under heavy loads, turning and when leaning on the sway bar. You can also tune your ride by installing one or both of these links depending on your driving style and terrain.


PM for pricing on a set of one or two for your X3

Features :

QUALITY FIT, FUNCTION, AND APPEARANCE
MADE IN THE USA
DIRECT BOLT ON TO STOCK X3 ALL MODELS
RE-VALVABLE AND RE-BUILDABLE
1/2" MICRO-ALLOY STEEL NITRID COATED SHOCK SHAFTS
ANODIZED FOR PROTECTION AND LONG LIFE
BILLET ALUMINUM DESIGN
2" SHOCK BODY DESIGN
1/2" STEEL BEARING AND URETHANE BUSHINGS

NOTES :
DESIGNED TO FIT IN OEM BRACKETS AND SWAY BAR ON THE RS
MODIFICATIONS REQUIRED FOR THE BASE AND DS MODELS

This Walker Link was design to work with OEM arms and Sway bar and may also work with aftermarket arms and sway bars so fitment may vary.

https://www.proutvparts.com/collections/walker-evans
 

Attachments

See less See more
6
#4 ·
Pm me price please.
 
Top