3" lift and 32s
Can-Am Maverick Forum - Powered by vBulletin

3" lift and 32s

This is a discussion on 3" lift and 32s within the Maverick R Max forums, part of the Can-Am Maverick Forums category; I'm wanting to go with a 32" tire on my 14 max, I'm running 30s now and have touched them to the fenders so I'm ...

Results 1 to 7 of 7
Like Tree1Likes
  • 1 Post By sfdefender

Thread: 3" lift and 32s

  1. #1
    Junior Member justinvr81's Avatar
    Join Date
    Feb 2015
    Location
    Tumbler Ridge BC, Cananda
    Posts
    18
    Member #
    4964

    3" lift and 32s

    I'm wanting to go with a 32" tire on my 14 max, I'm running 30s now and have touched them to the fenders so I'm thinking 3 " lift. I'm just looking for some feedback from others that have this set up as far as power loss and increased breakage
    Thanks


    Sent from my iPhone using Tapatalk

  2. #2
    Junior Member TaylorOutdoors's Avatar
    Join Date
    Jul 2018
    Location
    Atlanta, GA
    Posts
    6
    Member #
    48634
    You will definitely have to do some clutch work so as to not burn up belts. I only have 30s on mine and was burning up belts, so I am putting on a dalton clutch kit to compensate for the larger tires.

  3. #3
    Junior Member justinvr81's Avatar
    Join Date
    Feb 2015
    Location
    Tumbler Ridge BC, Cananda
    Posts
    18
    Member #
    4964

    Got it done, I'm happy, this is a quiet forum


    Sent from my iPhone using Tapatalk

  4. Remove Advertisements
    MaverickForums.net
    Advertisements

  5. #4
    Senior Member Goairborne's Avatar
    Join Date
    Sep 2012
    Location
    East Mesa Arizona
    Posts
    308
    Member #
    112
    Liked
    118 times
    LOl trust us this isn't a quiet forum, it's just quiet because it's not to much of a riding season us do to the heat. Good time for up grades and catch up on maintenance. By the way your max came out looking good, I had the red black & white 14' Max before the x3 max hit the scene. Awesome...

  6. #5
    Junior Member sfdefender's Avatar
    Join Date
    Sep 2019
    Posts
    13
    Member #
    53813
    Liked
    4 times
    Max looks killer. I know it has been a little over a year but I was wondering how it was going. I am getting ready to put a 3 inch SuperATV bracket lift on my 2017 Max 1000R DPS so I can bolt on 20 inch MSAs with 33 inch BKT 171s. Did the 3 inch lift clear your 32s? And did you change the clutch, and if so, what did you do? I am looking at a CVTech primary with a custom set-up and maybe a secondary spring change or aftermarket secondary. I do not drive hard or crazy, mainly a booze cruiser, but I do not want to be swapping belts on the trail either.
    Last edited by sfdefender; 09-05-2019 at 12:40 AM.
    justinvr81 likes this.

  7. #6
    Junior Member justinvr81's Avatar
    Join Date
    Feb 2015
    Location
    Tumbler Ridge BC, Cananda
    Posts
    18
    Member #
    4964
    Quote Originally Posted by sfdefender View Post
    Max looks killer. I know it has been a little over a year but I was wondering how it was going. I am getting ready to put a 3 inch SuperATV bracket lift on my 2017 Max 1000R DPS so I can bolt on 20 inch MSAs with 33 inch BKT 171s. Did the 3 inch lift clear your 32s? And did you change the clutch, and if so, what did you do? I am looking at a CVTech primary with a custom set-up and maybe a secondary spring change or aftermarket secondary. I do not drive hard or crazy, mainly a booze cruiser, but I do not want to be swapping belts on the trail either.
    Thanks, the lift cleared the tires just fine. Iím running the stock primary and just an upgraded black/purple spring in the stock secondary. I donít beat on it too hard and spend most of the time in low range. But it chews the the mud pretty good. Itís definitely a bit of a dog in high though.
    Iím curious to hear how it works with the clutching set up you are talking about works


    Sent from my iPhone using Tapatalk

  8. #7
    Junior Member sfdefender's Avatar
    Join Date
    Sep 2019
    Posts
    13
    Member #
    53813
    Liked
    4 times
    Thanks for getting back to me Justin. I just got back from Brimstone in TN so after I get her cleaned up I am installing the lift and the wheels/tires. I am ordering the SuperATV HD tie rod kit as well, and also the clutch setup. I have got a month or so before I am going riding again so I have got time to work on it. The Mav Max did awesome in TN though. I was totally impressed. We did a lot of technical riding through mountains, rocks, mud, and hills with massive washouts. No breakages and only one roll over on the side. Had a blast up there.
    Attached Images Attached Images

Sponsored Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts